Hydrotreating of Egyptian Heavy Vacuum Gas Oil over Co-Mo/Carbon Nanotube Catalyst | ||||
| Egyptian Journal of Chemistry | ||||
| Article 5, Volume 59, Issue 3, June 2016, Page 363-379 PDF (1021.84 K) | ||||
| DOI: 10.21608/ejchem.2016.1086 | ||||
 View on SCiNiTO | ||||
| Abstract | ||||
| THE HYDROTREATING catalyst development is an essential ……..factor to produce clean fuels. The catalytic performance of CoMoS/CNT on Hydrotreating of the Egyptian heavy vacuum gas oil was investigated. Firstly the CNT was functionalized with concentrated HNO3. The Mo and Co wt% were loaded on CNT by impregnation methods. The catalyst was characterized by X-ray diffraction, Raman Spectroscopy, TEM, and BET. The hydrotreating experiments were conducted on autoclave reactor at various operating conditions of Temperature (325-375) oC, pressure (20- 60) bar, time (2-6) h and cat/oil ratio of 1:75, 33 and 10. The result indicated that the CoMoS/CNT was an efficient for the hydrotreating process. Also, the hydride-sulfurization (HDS) enhanced with increasing catalyst/oil ratio. Moreover, Results revealed that the optimum condition (temperature 350 oC, Pressure 40 bar, catalyst/oil ratio of 1:75 for 2 hr, was chosen. Additionally, even at low catalyst ratio of 1:75 an acceptable HDS% of 77.1 was achieved. | ||||
| Keywords | ||||
| Hydrotreatment; Heavy vacuum gas oil (HVGO); Carbon nanotubes and CoMo/CNT | ||||
|
Statistics Article View: 373 PDF Download: 639 |
||||
