DEVELOPMENT OF A SEED DRILL FEEDING DEVICE TO SUIT PLANTING IN HILLS
Afify, M. (2009). DEVELOPMENT OF A SEED DRILL FEEDING DEVICE TO SUIT PLANTING IN HILLS. EKB Journal Management System, 26(2), 561-579. doi: 10.21608/mjae.2009.108893
M. K. Afify. "DEVELOPMENT OF A SEED DRILL FEEDING DEVICE TO SUIT PLANTING IN HILLS". EKB Journal Management System, 26, 2, 2009, 561-579. doi: 10.21608/mjae.2009.108893
Afify, M. (2009). 'DEVELOPMENT OF A SEED DRILL FEEDING DEVICE TO SUIT PLANTING IN HILLS', EKB Journal Management System, 26(2), pp. 561-579. doi: 10.21608/mjae.2009.108893
Afify, M. DEVELOPMENT OF A SEED DRILL FEEDING DEVICE TO SUIT PLANTING IN HILLS. EKB Journal Management System, 2009; 26(2): 561-579. doi: 10.21608/mjae.2009.108893

DEVELOPMENT OF A SEED DRILL FEEDING DEVICE TO SUIT PLANTING IN HILLS

Misr Journal of Agricultural Engineering
Article 1, Volume 26, Issue 2, April 2009, Page 561-579  XML PDF (642.32 K)
Document Type: Original Article
DOI: 10.21608/mjae.2009.108893
View on SCiNiTO View on SCiNiTO
Author
M. K. Afify
Ass. Prof. of Agric. Eng. Dept., Fac. of Agric., Zagazig Univ., Egypt.
Abstract
Field experiments were carried out  to develop the fluted feeding device of seed drill equipment to accommodate the planting of seeds in hills especially  the medical and aromatic seeds and that which favored by abundant branches such as Nigella sativa " black seed "seed under study. The evaluation of  developed seed drill is carried out through the terms of four forward speed [3.13, 3.54, 4.28 and 4.85 km/h ] and four distances between hills [zero(before development), 15, 30 and 45 cm (after development)] and constant distance between rows of 40 cm. The evaluation of the developed seed drill was investigated through the plant characteristics as follows; germination period, germination ratio, The stem length, number of branches per plant, plant population per square meter, number of capsules per plant, weight of seed per plant, and total seed yield for each treatment. The field capacity, field efficiency, power, energy, and production cost were taken into consideration. The results concluded that the optimum distance between hills was 30 cm to achieve higher seed yield of 815 kg/fed, lower energy of 7.24 kW.fed/ton, production cost of 26.44 L.E/ton and higher germination ratio of 95.37 % with higher field efficiency of 89.41% at forward speed of 3.13 km/h .so the results recommended using the distance between hills of 30 cm and ranged forward speed of 3.13~ 3.54 km/h.
References
Abo El-Ees, N. A. (1985).The effect of seed-bed preparation and method of planting on crop yield. Misr J. Agric. Eng. Vol.2 NO. (4): l31 – 136.

 Adbou, F. M. (1995). Design of a combination unit for cultivating, ridging, and spraying pesticide and fertilizer. Misr J. Agric. Eng. Vol. 12 No. (3): 601-623.

Afify, M. K., M. M. A. El-Sharabasy, and M. M. A. Ali (2007) Development of a local threshing machine suits for threshing black seed (nigella  sativa). Misr J. Agric. Eng. Vol. 24 No. (4): 699-724.

Awady, M. N; E.Y. Ghoniem, and A. I. Hashish (1982): Agriculture comparison between wheat combine harvesters under Egyptian conditions. Res.Bul.Ain-ShamsUniv.:13p.

Bamgboye,  A. and A. Mofolasayo(2006). Performance evaluation of a two-row okra planter. Agricultural Engineering International: the CIGR journal. Manuscript PM 06 002. Vol. VIII. July.

Barger, E. L; R. A. Kepner and R. Bainer (1982): Principles of farm machinery. Willey and Sons Inc.New York.

Coates, W. (1992) Performance evaluation of a pendulum spreader. Trans. ASAE, 8 (3): 285 – 288.

Dickey, E.C. and P. Jasa (1989). Row Crop Planters: Equipment Adjustments and Performance in Conservation Tillage. NebGuide G83-684, University of Nebraska Cooperative Extension, Lincoln, NE68583.

El-Raie, A. E. S; N. A. Hendawy and A. Z. Taib (1996): Study of physical and engineering properties for some agricultural products. Misr. J. Agric. Eng. 13(1): 211-226.

El-Shafy, M. W. (1986) Mechanization of onion and pulps production. Report ( In Arabic ) Agric. Eng. Res. Inst., p: 30- 40.

Gamal, H. E.; M. A. El-Attar; S. E. Bader and I. Yahia(2001). Effect of mechanical planting system on Canola crop yield. Misr J. Agric. Eng. Vol.18 NO. (4): l63 – 172.

Gupta, C. P. and Totok Herwanto(1992). Design and development of a direct paddy seeder. Agricultural Mechanization in Asia, Africa and Latin America. Vol. 23, No. 1, Pp. 23-27.  

Ibrahim, M.M.; H. N. Abd El-Mageed and T. H. Abd- Alla (2008). Development and evaluation a small machine for soaked rice direct planting. Misr J. Agric. Eng. Vol. 25 No. (3): 655-676.

 Khan, A.U. and A.F. El-Sahrigi, (1990). Selective mechanization of  rice farming system in tropical Asia.  Agric. Eng. Today 14(3,4): 40,52.

Ministry of Agricultural and land reclamation (2007) Economic affair sector, Agricultural statistics crops.

Nour, H.M., (1990).Evaluation of rice harvesting. Unpublished M.Sc. Thesis, Ag. Mech. Dept., Faculty of Agric., Mansoura Univ.Egypt.

Panning, J. W.; M. F. Kocher; J. A. Smith and S. D. Kachman (2000). Laboratory and field testing of seed spacing uniformity sugar beet planters. Applied Engineering in Agriculture. Vol (16) No. (5): 7 – 13.

Parish, R. L.; P. E. Bergeron and R. R. Bracy (1991). Comparison of vacuum and belt seeders for vegetables planting. Applied Engineering in Agriculture. Vol (7) No. (5): 537 – 540.

Rao, A.N. ; D.E. Johnson ; B. Sivprasad ; J.K. Ladha and A.M. Mortimer (2007).Weed management in direct-seeded rice. Advances in Agronomy, volume 93(2007): 152 - 255.

وزارة الزراعة واستصلاح الأراضی. مرکز البحوث الزراعیة . الإدارة المرکزیة للإرشاد الزراعی (2005) "خدمة وزراعة حبة البرکة" . معهد بحوث البساتین – قسم بحوث النباتات الطبیة والعطریة- نشرة رقم 984.

Statistics
Article View: 241
PDF Download: 478