THE CORROSION BEHAVIOUR OF Zn-4Al (AC43A) AND Sip/(Zn-4Al) COMPOSITES IN AN ARTIFICIAL SEA WATER | ||||
| JES. Journal of Engineering Sciences | ||||
| Article 15, Volume 34, No 2, March and April 2006, Page 577-586 PDF (924.43 K) | ||||
| Document Type: Research Paper | ||||
| DOI: 10.21608/jesaun.2006.110475 | ||||
 View on SCiNiTO | ||||
| Authors | ||||
| A. A OMAR* ; A. KANDIL* | ||||
| Mining and Petroleum Engineering Department, Faculty of Engineering, Al-Azhar University, Nasr City, Cairo, EGYPT | ||||
| Abstract | ||||
| The corrosion behavior of the cast Zn-4Al and Si/(Zn-4Al) alloys when attacked by 3.5% NaCl solution at different temperatures, 31, 40, 50, and 60 0C was investigated. The Tafel intercept logarithmic polarization methods was utilized for determining the corrosion parameters. Some corrosion kinetic and mechanistic parameters have been studied in the absence and presence various concentration of K2CrO4. The study indicated that the percentage inhibition efficiency increased with the increase of the inhibitor concentration and decreased with increase of solution temperature. The activation energy of corrosion increased by the increase of both the corrosion rate and temperature. The addition of Si particles into Zn-4Al can greatly improve the corrosion resistance and has a significant effect on the Tafel polarization measurements. The corrosion resistance increase with increasing the volume fraction of Si-Particles. | ||||
|
Statistics Article View: 142 PDF Download: 384 |
||||
