MODIFICATION OF COMBINE HARVESTER HEADER FOR REAPING ALFALFA | ||||
| Egyptian Journal of Agricultural Research | ||||
| Article 18, Volume 90, Issue 3, September 2012, Page 1203-1221 PDF (743.69 K) | ||||
| Document Type: Original Article | ||||
| DOI: 10.21608/ejar.2012.162982 | ||||
 View on SCiNiTO | ||||
| Authors | ||||
| ATEF E. ELYAMANI1; SAMER K. GENAIDY1; ABDEL-FATAH M. DREES2 | ||||
| 1Agricultural Engineering Research Institute, Agricultural Research Center, Dokki, Giza, Egypt. | ||||
| 2Faculty of Agriculture, Assiout University, Egypt. | ||||
| Abstract | ||||
| Experiments were conducted in West Nubaria by using combine harvester with modified header to fit reaping alfalfa to increase productivity and minimize losses. The effect of forward speed of 3.20, 3.45, 3.78 and 4.32 km/h, cutting height of 3, 5, 8 and 10 cm, and cutter bar speed of 2.28, 3.18 and 3.78 m/s were studied. Measured performance indicatoss include field capacity and efficiency, cutting efficiency, productivity, total losses, energy requirements, operational and criterion function costs of reaping alfalfa were evaluated. The results indicated that, maximum cutting efficiency of 98.6%, minimum total losses of 3.28% and minimum criterion function costs of 91.54 LE/fed recorded with forward speed of 3.2 km/h, cutting height of 3 cm and cutter bar speed of 3.78 m/s, meanwhile maximum field efficiency was 90 % recorded with previous condition as if cutting height was 10cm. Also, maximum field capacity of 3.72 fed/h, while maximum productivity of 10.89 ton/h, energy requirements of 35.39 kW.h/fed, and harvesting operational costs of 53.4 LE/fed recorded with forward speed of 4.32 km/h, cutting height of 10 cm and cutter bar speed of 3.78 m/s. | ||||
|
Statistics Article View: 171 PDF Download: 471 |
||||
