Simulation Model of Hybrid Renewable Sources Integration Using MATLAB/Simulink | ||
The Egyptian International Journal of Engineering Sciences and Technology | ||
Article 11, Volume 37, Issue 2, March 2022, Pages 39-48 PDF (1002.39 K) | ||
Document Type: Original Article | ||
DOI: 10.21608/eijest.2021.86559.1081 | ||
Authors | ||
Abdelrahman Mohamed Garah* 1; Mohamed Talaat2; Mohamed Farahat1 | ||
1Electrical Power and Machines, Faculty of Engineering, Zagazig University, Egypt | ||
2Electrical Power and Machines , Faculty of engineering. Zagazig universty | ||
Abstract | ||
Renewable energy is an indispensable source at present, where many resorted to the use of renewable energy, but there is a problem as a discontinuous source, according to climatic conditions and the surrounding environment. Thus, researchers worked on a new system to control climate changes affecting the production of renewable energy, which is a Hybrid system where Uses more than one source to maintain energy continuity and uses an energy storage system. In this paper, three different sources of renewable energy (solar energy - wave energy - fuel cell energy) are integrated and an energy storage system was used. Buck-boost converter circuits were used in the three sources and connecting them to the DC busbar. The inverter was used to convert from DC to AC to supply the load. A new integrating system was used to connect three sources and store energy at the same time from the surplus energy. When there is a problem with one of the sources, the battery bank feeds the system directly. The simulation model of the whole hybrid power system is implemented using Matlab / Simulink. It is clear from the results that the controller has high efficiency and accuracy and has the ability to integrate more than two sources. | ||
Keywords | ||
Renewable; energy integration Wave; energy Fuel; cell | ||
Statistics Article View: 468 PDF Download: 497 |