APPLICATION OF HYDROCALC PROGRAM TO CHOOSE THE OPTIMUM DRIP IRRIGATION SYSTEM DESIGN | ||||
| Misr Journal of Agricultural Engineering | ||||
| Article 9, Volume 39, Issue 1, January 2022, Page 133-152 PDF (1.52 MB) | ||||
| Document Type: Original Article | ||||
| DOI: 10.21608/mjae.2021.108081.1054 | ||||
 View on SCiNiTO | ||||
| Authors | ||||
Waleed M. B. Darwish  1; Mohamed A. El-Howeity2; Mohamed S. Elbelkemy3
| ||||
| 1Assoc. Prof., Ag. Eng., Environ. Studies and Res. Inst., U. of Sadat City, Menoufia, Egypt. | ||||
| 2Prof. of Soil. Micro., Environ. Studies and Research Inst., U. of Sadat City, Menoufia, Egypt. | ||||
| 3Grad. Stud. at Environ. Studies and Res. Inst., U. of Sadat City, Menoufia, Egypt. | ||||
| Abstract | ||||
| Recently the use of irrigation systems design programs is considered one of the most important programs because of its many benefits represented in obtaining the optimal design specifications for different irrigation systems, which leads to maximize both water application efficiency and water use efficiency (WUE) along the irrigation network, especially drip irrigation, while the random design of Irrigation systems affect the regularity and efficiency of water distribution, which negatively affects the production of different crops. Hence, the main objective of this research was to apply the HydroCalc program as one of the irrigation system design programs to choose the optimal design of the drip irrigation system for a new farm in the reclamation areas of the European countryside in Giza province. The coordinates of the study area were raised using a GPS device, which extends over an area of 138 ha. The HydroCalc program was used to choose the appropriate diameters and lengths of pipes, as well as calculate the pressure losses for the irrigation network to be designed. The engineering drawing program (AutoCAD) was used to divide the arable areas into plots and draw the appropriate irrigation network and determine its dimensions that were designed with the HydroCalc. In conclusion, the application of using the HydroCalc program helped to choose the appropriate design for the irrigation system. | ||||
| Keywords | ||||
| Drip irrigation; HydroCalc program; Optimum design | ||||
| References | ||||
|
Baiamonte, G. (2018). Explicit relationships for optimal designing rectangular microirrigation units on uniform slopes: The IRRILAB software application. Comput. Electron. Agric., 153, 151–168.
Ghaemi, A. A., and Tabarzad. A. (2014). Development of micro irrigation design software (mids) to optimize total project cost and hydraulic parameters. Transactions of Civil Engineering, 38(C1): 297–307.
Gilary, E. (2008). HydroCalc Irrigation Planning User Manual. NETAFIM Corporation.
Mahrous, A., Hanafy, M. Bakeer, G. A. and Bazaraa. A. S. (2008). Computer program for predicting emission uniformity of odd-shaped subunits in drip irrigation system. Misr Journal of Agricultural Engineering, 25(4): 1240–1255.
Narayanan, R., Steele, D. and Scherer, T. (2002). Computer model to optimize above-ground drip irrigation systems for small areas. Applied Engineering in Agriculture, 18, No. 4, 459–469.
Nina, P., Olga, N. Kazandjiev, V. and Lubomirova. M. C. (2012). A computer program for drip irrigation system design for small plots. Journal of Theoretical and Applied Mechanics, Sofia, 42(4): 3–18.
Pannunzio, A., M. Román, J. Brenner, and A. Wölfle. (2004b). Economic overview of drip and microirrigation systems in humid regions. p. 52. Proceedings of the VII World Citriculture Congress, Agadir, Marruecos. International Society of Citriculture (ISC), Riverside, California, USA.
Philipova, N., Nicheva, O., Kazandjiev, V. and Chilikova-Lubomirova, M. (2012). A computer program for drip irrigation system design for small plots. Journal of Theoretical and Applied Mechanics, Sofia, vol. 42, No. 4, pp. 3–18.
Rossman, L.A. (2000). Epanet 2 User’s Manual; US EPA: Cincinnati, OH, USA.
Sharaf, G. A., and Hassan. A. (2006). Design of small holdings irregular shape micro irrigation unit. In the 14th. Annual Conference of the Misr Society of Agriculture Engineering. Egypt, 22 November.
Sharu, E.H., and Razak, Ms. Ab. (2020). Hydraulic performance and modelling of pressurized drip irrigation system. Water, 12, 2295; doi:10.3390/w12082295.
Zella, L., Kettab, A. and Chasseriaux, G. (2006). Design of a micro-irrigation system based on the control volume method. Biotechnology, Agronomy, Society and Environment, 10(3): 163–171.
Online irrigation software sites:
| ||||
|
Statistics Article View: 1,711 PDF Download: 1,099 |
||||
