Improving the structural specifications of the fabrics used in the production of Breast-feeding pads | ||||
| International Journal of Multidisciplinary Studies in Art and Technology | ||||
| Volume 5, Issue 1, June 2022, Page 1-17 PDF (1.21 MB) | ||||
| Document Type: Original Article | ||||
| DOI: 10.21608/ijmsat.2022.231045 | ||||
 View on SCiNiTO | ||||
| Author | ||||
| Mona Ali Ahmed Wageeh | ||||
| Assistant Professor, Department of Fashion Design Al Qussaim university- Saudi Arabia | ||||
| Abstract | ||||
| Medical fabrics are considered one of the modern technologies in the field of fabric production, which is a mixture of medical sciences and spinning and weaving technology. It is also known as textile products that are used in the field of health and human care. The fabrics used in the medical fields are considered of medical fabrics, which requires our interest to catch up with the progress in the field of technology and textile design, Hence we need to develop and raise the efficiency of the performance of these fabrics to bring it to the level of quality, which achieves its effectiveness in the field of global competition. This research aims to study the Production of Breastfeeding pads used to prevent milk leaking from the breast from appearing on clothes It is one of the essentials that a mother needs while breastfeeding through the production of fabric samples (woven - knitwear) and to determine the most suitable materials, as raw materials (100% cotton - cotton / polyester 50% - 50%) and also the most suitable structural compositions for production, as it used plain 1/1, Twill 2/1 and Jersey and Rib 1/1 INTERNATIONAL JOURNAL OF MULTIDISCIPLINARY STUDIES IN ART AND TECHNOLOGY ISSN: 2735-4342 VOLUME 5, ISSUE 1, 2022, 1 – 17. www.egyptfuture.org/ojs/ 2 The most important results that were reached through the research were as follows: 1- The Twill 2/1 cotton / polyester 50%: 50% sample recorded the lowest weight among the samples, while plain 1/1 cotton 100% recorded the highest weight among the produced samples. 2- The Twill 2/1 cotton / polyester 50%: 50% sample recorded the lowest thickness among the samples, while plain 1/1 cotton 100% recorded the highest weight among the produced samples. 3- The samples produced using cotton 100% recorded the highest air permeability, as the jersey cotton 100% sample achieve the highest air permeability, while the plain sample 1/1 polyester 100% recorded the lowest air permeability among the samples produced. 4- The jersey cotton 100% sample recorded the highest percentage of water absorption among the samples, while the plain 1/1 polyester 100% sample recorded the lowest water absorption percentage among the produced samples. | ||||
| Keywords | ||||
| Medical fabrics; breast feeding pads | ||||
|
Statistics Article View: 160 PDF Download: 211 |
||||
