On the influence of Machining parameters on the surface characteristics and material removal rate of Epoxy/Bn Nanocomposites | ||||
| Engineering Research Journal (Shoubra) | ||||
| Volume 43, Issue 1, January 2020, Page 13-16 PDF (340.33 K) | ||||
| Document Type: Research articles | ||||
| DOI: 10.21608/erjsh.2020.242109 | ||||
 View on SCiNiTO | ||||
| Authors | ||||
| T. H.Al-Mutairi; S. .A. Abd-Allah; S. S.S.Habib | ||||
| Mechanical Engineering Department, Shoubra Faculty of Engineering, Benha University, Cairo, Egypt. | ||||
| Abstract | ||||
| In the present investigation, the influence of machining parameters during turning on the surface characteristics and material removal rate of epoxy/BN nanocomposites. The influence of machining parameters, typically, the feed rate, cutting speed, and depth-of-cut on the surface characteristics of epoxy/BN nanocomposite workpieces, typically, the surface roughness (Ra) and roundness error (Er) were evaluated. Moreover, the influence of the aforementioned machining parameters on the material removal rate of epoxy/BN nanocomposites was investigated. Empirical regression models were developed to estimate influences of the aforementioned independent variables on the MRR, Ra and Er. | ||||
|
Statistics Article View: 115 PDF Download: 104 |
||||
