EFFECT OF WATER QUALITY AND IRRIGATION PRACTICIES ON SOME SOIL PROPERTIES AND PRODUCTIVITY | ||||
| Journal of Soil Sciences and Agricultural Engineering | ||||
| Article 1, Volume 27, Issue 10, October 2002, Page 7101-7115 PDF (4.33 MB) | ||||
| Document Type: Original Article | ||||
| DOI: 10.21608/jssae.2002.255229 | ||||
 View on SCiNiTO | ||||
| Author | ||||
| M. A. Ghazy | ||||
| Soil, Water and Environment Research institute, A.R.C., Egypt. | ||||
| Abstract | ||||
| Lysimeter experiments were carried out at Sakha Agric. Res. Station during the two growing seasons of 1999/2000 and 2000/2001 in three successive crops to study the effect of different water sources and water regime on the productivity of maize, sugar beet and cotton crops, some soil chemical properties and water relations under surface and suo surface irrigation. The main results can be summarized as follows: 1- There were significant affects of water sources, methods of irrigation and water applied levels on yield and yield components of the three crops. Irrigation with secondary treated sewage water produced the highest yield and its components under surface irrigation method. The irrigation at 50% depletion of available soil moisture (b) gave the highest yield and yield components of the three crops. While the lowest yield was obtained with irrigation at 80% depletion of available soil moisture by well water. 2- The contents of macro and micro nutrients and heavy metals in maize grains, sugar beet roots and cotton seeds were increased with secondary treated sewage water followed by drainage water. While the lowest content was achieved by fresh water. The concentration of elements in maize grains was higher than sugar beet roots and cotton seeds by about 16 and 25%, respectively. The surface irrigation increased the elemental contents of maize, sugar beet and cotton by about 20, 10 and 5%, respectively over that with sub surface irrigation. 3- Soil salinity (ECe) and alkalinity (SARe) were increased as a result of irrigation by well water under subsurface irrigation and irrigation at 80% depletion of available soil moisture. While the lowest values of ECe and SARe were obtained with irrigation at 35% depletion of available soil moisture by fresh water under surface irrigation. 4- Soil elemental content was increased with low quality water, this increase was pronounced with irrigation at 35% depletion of available soil moisture by sewage water and drainage water under surface irrigation. 5- The highest amount of irrigation water applied and water consumptive use (WCU) were obtained with irrigation at 35% depletion of available soil moisture under sub surface irrigation method. While the irrigation at 80% depletion of available soil moisture and surface irrigation method recorded the highest values of crop water use efficiency (CWUE). | ||||
|
Statistics Article View: 85 PDF Download: 257 |
||||
