RECYCLING OF WASTE OYSTER SHELLS AS A REINFORCEMENT MATERIALS FOR AA7075 ALLOY | ||||
| Journal of Al-Azhar University Engineering Sector | ||||
| Article 1, Volume 17, Issue 65, October 2022, Page 1362-1375 PDF (743.08 K) | ||||
| Document Type: Original Article | ||||
| DOI: 10.21608/auej.2022.160109.1296 | ||||
 View on SCiNiTO | ||||
| Author | ||||
Hassan Abdelfattah Metwally  
| ||||
| Department of Mining and Petroleum Engineering, Faculty of Engineering, Al-Azhar University, Cairo, 11371, Egypt. | ||||
| Abstract | ||||
| In the current research, oyster shells have been recycled by reinforcing with aluminum alloy AA7075 using the stir casting method. The oyster shells (OS) were washed and milled via high energy ball mill. The produced castings were fabricated with various content of the OS particles as (0-15 Wt.%). The effect of oyster shell particles (OS) on the microstructures, mechanical properties and corrosion behavior of AA7075/OS composites has been studied. The microstructure results revealed a uniform distribution of oyster shell particles within AA7075 matrix. Compression, brinell hardness, and impact tests of the sample were carried out to identify the mechanical properties of the composite. The hardness was increased from 37%, 61% and 88.7% for AA7075 reinforced with 5, 10 and 15% OS composite compared with unrienforced AA7075. On the other hand, the ultimate compressive strength was improved from 10.7%, 19.8% and 25.9% for AA7075 reinforced with 5, 10 and 15% OS composite compared with unreinforced AA7075. The corrosion rate and weight loss method were carried out by immersing the specimens in 0.1M NaOH and 0.1M H2SO4 solutions. Results revealed that the rate of corrosion and mass loss were decreased with an increase of mass fraction up to 15%. | ||||
| Keywords | ||||
| Stir Casting; Oyster shell; Composites; Mechanical properties; Corrosion rate | ||||
|
Statistics Article View: 222 PDF Download: 328 |
||||
