Desulfurization of Initial Sulfur Compounds in Diesel Fuel by Oxidation-Emulsification Processes | ||
| Egyptian Journal of Chemistry | ||
| Volume 65, Issue 131, December 2022, Pages 791-805 PDF (854.99 K) | ||
| Document Type: Original Article | ||
| DOI: 10.21608/ejchem.2022.121709.5466 | ||
| Authors | ||
| Ahmed A. Hantosh; Adnan A. AbdulRazak; Adel Sharif Hamadi | ||
| Chemical Engineering Department, University of Technology, Baghdad, Iraq. | ||
| Abstract | ||
| In the present study, the combined oxidation–emulsification was used to desulfurize diesel fuel with a hydrogen peroxide–acetic acid oxidation system. A full 20 central composite design response surface method was employed to study the effect of 5-20% oxidant range, 40-100ᵒC temperature range and 20-90 min time. A 0.781% sulfur content was obtained at 12.5 wt% oxidant ratio, 65ᵒC temperature 60 min via the oxidation process. The effect of emulsification desulfurization on oxidized diesel fuel was investigated using five surfactants: cetyltrimethylammonium chloride (cationic), nonylphenol ethoxylates (nonionic), alkylbenzene sulfonate (anionic), tween 80 (nonionic), and 1-hyroxy-2-(trimethylammonio) ethane-1-sulfonate (Amphoteric). A 0.598% sulfur content was obtained using alkylbenzene sulfonate. The desulfurize diesel fuel was charactizied using GC-MASS, IREX, and FTIR. The results indicated that the combined oxidation–emulsification process may be used to desulfurize diesel. | ||
| Keywords | ||
| Oxidation; emulsification; desulfurization; diesel fuel; response surface; surfactant | ||
|
Statistics Article View: 736 PDF Download: 398 |
||
