Influence of Preheating on the Grindability of Mono/Poli Mineral Ores

[1]    Kawatra, S.K., “Temperature effect on grinding circuit performance”, Miner. Metall. Process, Vol.6, No.2, pp.85-87, 1989.

[2]   Kawatra, S.K., “Effect of temperature on the energy efficiency of an industrial circuit processing iron ore”, Miner. Metall. Process, Vol.8, No.1, pp.32-37, 1991.

[3]   Lytle, J., Cohi, N., and Prisbrey, K., “Influence of preheating on grindability of coal”, Int. J. of Mineral Processing, Vol.36, pp.107-112, 1992.

[4]   Ahmed, A.A., and Rizk, A.M., “Influence of thermal treatment on the grindability of feldspar”, 8^th Inter. Conf. on Mining, Petroleum and Metall. Engng. (MPM8) Suez Canal Univ., Egypt, 17-19 March, pp.305-315, 2003.

[5]   Ahmed, A.A., Ahmed, M.M., and Rizk, A.M.E., “Preheating as an aid to comminution process”, Journal of Engng. Sciences (JES), Faculty of Engng. Assiut University, Vol. 31, No.4, pp.985-994, 2003.

[6]   Walkiewicz, J.W., Indroth, D.P., and Clark, A.E., “Iron ore grindability improved by heating”, E& MJ, pp.16B-16C, 1996.

[7]   Ersayin, S., Ergun, L., and Benzer, H., “The effects of heat treatment on grinding and liberation of chromite ore”, Progress in Mineral Processing Technology, Demirel & Ersayin (Eds), pp.33-37, 1994.

[8]   Fitzgibbon, K.E., and Veasey, T.J., “Thermally assisted Liberation- a review”, Minerals Engng., Vol.3, No. 1/2, pp.181-185, 1990.

[9]   Sener, S. and Ozbayoglu, G., “Effect of heat treatment on grindability of ulexite”, Innovations in Mineral and Coal Processing, Atak, Onal and Celik (Eds), Balkema, Rotterdam, pp. 29-31, 1998.

[10]              Pocock, S., Veasey, T.J., Tavares, L.M., and king, R.P., “The effect of heating and quenching on grinding characteristics of quartzite”, Powder Techn., Vol.95 pp.137-142, 1998.

[11]              Wonnacott, G., and Wills, B.A., “Optimization of thermally assisted liberation of a tin ore with the aid of computer simulation”, Minerals Engng., Vol.3, No.1/2, pp.187-198,1990.

[12]              Geller, L.B., and Tervo, R.O., “Grinding of preheated rocks”, Trans. IMM, Sec.C., Vol.25, pp.25-33, 1975.

[13]              Black burn, S, and Veasey. T. J., “Effect of heat treatment in air at 820-960° c on magnetic properties of wolframite”, Trans. IMM, Vol.93, pp.85-88, 1984.

[14]              Hariharan and Venkatachalam, S., “Influence of thermal treatment upon grindability of quartz”, Mining Magazine, pp.105-108, 1977.

[15]              Veasey, T.J., and Wills, B.A., “A review of methods improving mineral liberation”, Minerals Engng., Vol.4, No.7-11, pp.747-752, 1991.

[16]              Wang, E., Shi, F., and Manlapig, E., “Factors affecting electrical comminution performance”, Minerals Engng., Vol.34, pp.48-54, 2012.

[17]              Shadi, A., Ahmadihossini, A., Rabiei, M., Samea, P., Hassani, F., Sasmito, p., and Ali, S., “Numerical and experimental analysis of fully coupled electromagnetic and thermal phenomena in microwave heating of rocks”, Minerals Engng., Vol.178, 107406, 2022.

[18]              Hao, J., Qiao, L., and Li, Q., “Study on cross-scale pores fractal characteristics of granite after high temperature and rock failure precursor under uniaxial compression”, Powder Technology, 401, 117330, 2022.

[19]              Parker, T., Shi, F., Evans, C., and Powell, M., “The effects of electrical comminution on the mineral liberation and surface chemistry of a porphyry copper ore”, Minerals Engng., 82, pp.101-106, 2015.

[20]              Hartlieb, P., Toifl, M., Kuchar, F., Meisels, R., and Antretter, T., “Thermo-physical properties of selected hard rocks and their relation to microwave-assisted comminution “, Minerals Engng., 91, 34-41, 2016.

[21]              Hassani, F., Shadi, A., Rafezi, H., Sasmito, A.P., and Ghoreishi-Madiseh, A.G., “Energy analysis of the effectiveness of microwave-assisted fragmentation”, Minerals Engng., 159, 106642, 2020.

[22]              Che, L., Gu, X., and Li, H., “Numerical analysis and experimental research on hard rock fragmentation by high voltage pulse discharge”, Minerals Engng., 168, 106942, 2021.

[23]              Parapari, P.S., Parian, M., Palsson, B.I., and Rosenkranz, J., “Qualitative analysis of ore texture breakage characteristics affected by loading mechanism: Multivariate data analysis of particle texture parameters”, Minerals Engng., 181 107531, 2022.

[24]              Ji, B., and Zhang.W., “The effect of mechanical grinding and thermal treatment on the recovery of rare earth elements (REEs) from kaolinite”, Powder Technology 394, 621-631, 2021.

[25]              Abouzeid, A.Z.M., “Market specification of raw materials for ceramics industry”, 7^th Inter. Conf. on Mining, Petroleum and Metall. Engng. (MPM), Assiut Univ., Egypt, pp.101-108, 2001.

[26]              Ezz-Eldin, M., Abouzeid, A.M., El madawy, kh. Khaled, A.M., and El Sherif, R.E., “Mineral industry in Egypt-Part Π Non-Metallic Commodities-Silica Ores”, J. of Mining World Express (MWE), Vol.5, 2016.

[27]              Pan, X., Li, Y., Guo, P., Zhao, X., and Cai.Y.“Resource, characteristic, purification and application of quartz: a review”, Minerals Engng., 183, 107600, 2022.

[28]              Ipek, H., Ucbas, Y., and Hosten, C., “Ternary-mixture grinding of ceramic raw materials”, Minerals Engng., 18, pp. 45-49, 2005.

[29]              Mehrim, M.R., “Energetic of comminution”, M. Sc thesis, Mining and Metall.Engng. Dept., Faculty of Engng, Assiut University, 1970.

[30]              Miller, R.E., “Experimental design”, Chem.Engng., Vol.23, June, pp.113-117, 1986.

[31]              Rizk, S.A., “A study on the effect of physical and mechanical properties of rocks on their grindability”, Journal of Engng. Sciences (JES), Faculty of Engng., Assiut University, Vol.46 No.5, pp.574-586, 2018.

[32]              Davis, O.L., and Goldsmith, P.L. (Editors), “Statistical methods in research and production”, Edinburgh, Fourth Edition, 1972.

[33]              Botteril, J.S., “An introduction to simple statistical experimental design”, British Chem.Engng. Vol.9, No.3, 1964.

[34]              Sikong, L., Hashimoto, H., and Yashima, S., “Breakage behavior of fine particles of brittle mineral and coal”, Powder Tec., Vol.61, pp.51-57, 1990.

[35]              Martello, E.D., Bernardis, S., Larsen, R.B., Tranil, G., Sabatino, M.D., and Arnberg, L., “Electrical fragmentation as a novel refining route for hydrothermal quartz for SoG-Si production”, Minerals Engng., Vol.224, pp.209-216, 2012.