Conductivity Studies of Acrylonitrile Butadiene Rubber Composites Loaded with Different Types of Carbon Blacks | ||
| Journal of Textiles, Coloration and Polymer Science | ||
| Article 4, Volume 14, Issue 2, December 2010, Pages 113-126 PDF (699.96 K) | ||
| Document Type: Original Article | ||
| DOI: 10.21608/jtcps.2010.30564 | ||
| Authors | ||
| R.M.M. Morsi1; , M.N. Ismail1; A.A. Yehia2 | ||
| 1Dept. of Physical Chemistry and *Dept. of Polymers and Pigments, National Research Centre, Cairo, Egypt | ||
| 2Dept. of Physical Chemistry and *Dept. of Polymers and Pigments, National Research Centre, Cairo, Egypt. | ||
| Abstract | ||
| THE EFFECT of three types of carbon blacks namely: High abrasion furnace black (HAF), graphite and acetylenic carbon black on the electrical and mechanical properties of NBR composites were investigated. The conductivity of NBR composites is found to be 7 orders of magnitude higher than that of the filler-free NBR. It reaches ~10−3 S cm−1 at ~30oC in case of NBR composites loaded with acetylenic carbon black. The tensile strength of NBR/filler composites has been markedly increased, indicating high reinforcement efficiency, i.e., good interaction between the fillers and NBR. The NBR/HAF composites have the highest tensile strength, then NBR/Acetylenic CB and then NBR/graphite composites. The elongation at break of NBR/ filler composites was found to decrease with increasing the filler content. | ||
| Keywords | ||
| electrical conductivity; dielectric; Acrylonitrile butadiene rubber NBR; Mechanical Properties | ||
|
Statistics Article View: 342 PDF Download: 337 |
||
