The author received no financial support for the research, authorship, and/or publication of this article.
Reference & Literature Cited:
- A. Almetwally & M. M. Salem. (2010). Comparison between mechanical properties of fabrics woven from compact and ring spun yarns, Autex Research Journal, l (1):35-40.
- D. Topping. (1973). The critical slit length of pressurized coated fabric cylinders, Journal of Industrial Textiles. 3(2): 96–110.
- Ahmed Ramadan El-Tantawi. (2020). A Review on: The ratio between applied stresses and resultant strain behavior of textile materials (yarn and woven fabric). Journal of Architecture art and humanistic science. Special edition conference.
- Azza ali, Alla arafa &s Asmaa Glal. (2020). Study of Physical, Mechanical Properties and Sewability of Modal and Micromodal Fabrics and Comparing it with cotton, Journal of Applied Art and Science ,7(4):101-124.
- Bigaud, C. Szostkiewicz & P. Hamelin. (2003). Tearing analysis for textile reinforced soft composites under mono-axial and bi-axial tensile stresses, Composite Structural Journal. 62 (2):129–137.
- H Andersson,T Dartman1, G Langstedt & others. (1999). Strength, crack initiation and crack propagation in fabrics based flexible and semi flexible composite, ICCM- 12 processing of international conference, Paris, France.
- M. Krook & K.R. Fox. (1945). Study of the tongue-tear test, Journal of the Textile Institute Transactions, 15(11).
- Chu, R. Dhingra & R. Postle. (1991). Study of tearing properties of membrane coated fabrics, Journal of Dong Hua University, 8 (4): 1–9.
- Fatemeh Mousazadegan & Nazanin Ezazshahabi. (2017). Investigation of the
tearing performance of fabrics with various constructions, woven from different yarn spinning systems. Journal of textile and polymer, 5(2).
- THOMAS. (1955). Rupture of Rubber. II. The strain concentration at an incision, Journal of polymer and science, 18 (88): 177-188.
- SEOP SHIN. (2003). Test for measuring cut resistance of yarns, Journal of material science. 3 (8): 3603 – 3610.
- Jianwen Chen, Wujun Chen b , Bing Zhao b & Bo Yao a. (2015). Mechanical responses and damage morphology of laminated fabrics with a central slit under uniaxial tension: A comparison between analytical and experimental results, Construction and Building Materials journal, 101(1) : 488–502
- Jianwen Chen, Wujun Chen, Daxu Zhang.(2013).Experimental study on uniaxial and biaxial tensile properties of coated fabric for airship envelopes, Journal of reinforced plastics and composites , 33(7).
- Jianwen Chen, Wujun Chen, Han Zhou & others (2017). Central tearing characteristics of laminated fabrics: Effect of slit parameter, off-axis angle, and loading speed, Journal of Reinforced Plastics and Composites, 36(13):921–941.
- H. Turl. (1956). The measurement of tearing strength of textile fabrics, Textile research Journal. 26(3):169–176.
- Taylor. (1959). Tensile and tearing strength of cotton clothes, Journal of the Textile Institute Transactions ,50(1).
- Hirokazu . (1978). Strength of coated fabrics with crack, Journal of Industrial Textiles,7 (4) :269–292
- Morton, W. E. (1934). Some observation on fabrics strength in relation to yarn proprieties and density of structural. Journal of the Textile Institute Proceedings, 25(6): 262–265.
- Mukhopadhyay, S. Ghosh, & S. Bhaumik. (2006). Tearing and tensile strength behavior of military khaki fabrics from grey to finished process, International Journal of Clothing Science and technology, 18(4) : 247- 264.
- B. Hager, D.D. Gagliardi & H.B. Walker. (1947). Analysis of tear strength, Textile Research Journal, 17(7):376–381.
- Wang, B. Sun, B. Gu. (2012). Comparisons of trapezoid tearing behaviors of uncoated and coated woven fabrics from experimental and finite element analysis, International Journal of Damage Mechanics. 22 (4): 464–489.
- Wang, Q. Ma, B.Z. Sun & others. (2011). Finite element modeling of woven fabric tearing damage, Textile Research Journal, 81(12): 1273–1286.
- Patricia Dolez, Ennouri Triki & Toan Vu.( 2014). Factors affecting the tearing resistance of textile structures, Research Gate publisher.
- H. Yang, T. Hua1 , & C. W. Kan1 .( 2013). Modelling tearing behavior of durable press finished woven fabric, fibers and Polymers journal, 14 (8): 1386-1390.
- S. RIVLIN & A. G. THOMAS. (1953). Rupture of Rubber. I. Characteristic energy for tearing, Journal of Polymer Science, 10( 3): 291-318.
- Richard Steele & Irving J. Gruntfest.(1975) . An Analysis of Tearing Failure, Textile Research journal, 27(4):307-313.
- Dhamija & M. Chopra.( 2007). Tearing strength of cotton fabrics in relation to certain process and loom parameters, Indian Journal of Fiber and Textile Research, 32(4): 439-445.
- Samaneh Younesi & Nazanin Ezazshahabi. (2020): Tensile characteristics and stress relaxation analysis of woven fabrics in terms of fabric direction, The Journal of The Textile Institute, 111(3): 453–466.
- Seidel M. (2009). Tensile surface structures: A practical guide to cable and membrane construction. Berlin: John Wiley &Sons.
- Selin Hanife Eryuruk & Fatma Kalaoğlu. (2015).The effect of weave construction on tear Strength of woven fabrics, Autex Research Journal, 15(3).
- Shouhui Chen., Xin Ding., Raul Fangueiro., & (2009) .Tensile Performance and Crack Propagation of Coated Woven Fabrics under Multiaxial Loads, Journal of Applied Polymer Science, 113(5): 3388–3396.
- Ennouri, D. Patricia, V.K. Toan.(2011). Tear resistance of woven textiles criterion and mechanisms, Composites Part B: Engineering journal, 42 (7):1851–1859.
- A. Godfrey, J.N. Rossettos,& S.E. Bosselman. (2004). The onset of tearing at slits in stressed coated plain weave fabrics, Journal of Applied Mechanics. 71 (6):879–886.
- Teixeira NA, Platt M M, Hamburger W J. (1955). Mechanics of elastic performance of textile materials, part XII: Relation of certain geometric factors to the tear Sstrength of woven Fabric, Textile Research journal, 25(10): 838-861
- Thanikai Vimal, C. Prakash & A. Jebastin Rajwin.(2020). Effect of weave parameters on the tear strength of woven fabrics, Journal of Natural Fibers, 17(9).
- Greensmith& A. G. Thomas.(1955). Rupture of rubber. III. Determination of tear properties, Journal of Polymer Science, 18(88): 189-200.
- Zhong, N. Pan & D. Lukas. (2004). Stochastic modelling of tear behavior of
coated fabrics, Modelling and Simulation in Materials Science and Engineering Journal, 12 (2): 293–309.
- A. Scelzo, S. Backer. & M.C. Boyce. (1994). Mechanistic role of yarn and fabric structure in determining tear resistance of woven cloth: Part II: modeling tongue tear, Textile Research journal, 64 (6):321–329.
- Witkowska .B & Frydrych. I. (2004). A comparative analysis of tear strength methods, Fibers & Textiles in Eastern Europe Journal. 12 (2):42–47.
- Witkowska, Frydrych. I. (2008). Static tearing, Part II: analysis of stages of static tearing in cotton fabrics for wing-shaped test specimens, Textile Research Journal, 78 (11), 977–987.
- Witkowska,I. Frydrych .(2011). Soft Computing in Textile Engineering (17- Modelling the fabric tearing process), Woodhead Publishing Series in Textiles, Pages 424-489.
- Wlaa Fahmy , Doaa abd El ader , Alla arafa & others .(2021) .Effect of fabric properties knitted from Tencel and Tencel /Egyptian cotton blends with different fabric structure on fabric sewability Journal of Applied Art and Science ,8(4):101-124.
- Željko Penava, Diana Šimić Penava& Željko Knezić.( 2014).Determination of the elastic constants of plain woven fabrics by a tensile test in various directions, Fibers and Textile in Eastern Europe Journal, 2(104): 57-63.
|
View on SCiNiTO
