Possibility of obtaining Transparent Glaze from the Local clays of Qena Governorate | ||
| مجلة الفنون التشکيلية والتربية الفنية | ||
| Volume 7, Issue 2, July 2023, Pages 536-554 PDF (945.58 K) | ||
| Document Type: المقالة الأصلية | ||
| DOI: 10.21608/jfea.2023.333498 | ||
| Authors | ||
| Rasha Fawzi Ahmed Abd-Elrahim* 1; Hamada Mohmed Abdelmotalib2; Mohamed Ali Hassan3; ابراهيم دسوقي عبد الموجود سليمان4 | ||
| 1مدرس الخزف بقسم التربية الفنية - كلية التربية النوعية - جامعة جنوب الوادي | ||
| 22Mechanical Power and Energy Engineering Department, Faculty of Engineering, Minia University, Elminia ,6115, Egypt | ||
| 3Mechanical Department, Faculty of Technology and Education, Sohag University, Sohag, Egypt | ||
| 4قسم التربية الفنية - كلية التربية النوعية - جامعة جنوب الوادي | ||
| Abstract | ||
| Abstract Glaze is a glassy layer used to cover surfaces of different ceramic products. It gives ceramic surface hardness and high resistance to chemical and abrasion which contributes to enhancing the chemical and physical properties in addition to the aesthetics of the ceramic products. Production process of glaze is complex and expensive, as it requires accurate compositions of different materials most of which are expensive. herefore, the main aim of this study is to develop a transparent ceramic glaze from the Local clays of Qena Governorate. Three types of local clays used in this study were “Taffla” marl clay, “Hieba” Flood Clay, and Nile clay. The production processes were conducted at different combustion temperatures of 1000, 1050, and 1100°C using borax as alkaline fluxing agents at different ratios of 50%, 60%, and 70%. The glaze is produced only from the clay and fluxing agent without the need to add any former or bonding refractory materials which are common in traditional methods of glaze production. The required tests were carried out for clay and glaze to determine their different characteristics. Results showed that among the three products, the best results were achieved at combustion temperature of 1050°C and the highest alkaline fluxing agent ratio of 70%. Moreover, the obtained results demonstrated that the possibility of the production of transparent ceramic glaze directly from special types of clay without adding any other material which minimize effort, time glaze. | ||
| Keywords | ||
| Keywords: Ceramics; Clay; Fluxing Agent; Transparent Glaze; Local Clays of Qena Governorate | ||
| References | ||
|
References
[1] J. Ohimai and E. Okunna, "Developing Medium Range Temperature Glazes Using Locally Sourced Raw Materials," Tropical Built Environment Journal, vol. 1, no. 6, 2017.
[2] T. Pradell and J. Molera, "Ceramic technology. How to characterise ceramic glazes," Archaeological and Anthropological Sciences, vol. 12, no. 8, p. 189, 2020.
[3] M. Leśniak, W. Jastrzębski, M. Gajek, J. Partyka, D. Dorosz, and M. Sitarz, "The structure of model glasses of the amorphous phase of glass-ceramic glazes from the SiO2Al2O3CaOMgONa2OK2OZnO system," Journal of Non-Crystalline Solids, vol. 515, pp. 125-132, 2019.
[4] R. Pina-Zapardiel, A. Esteban-Cubillo, J. Bartolomé, C. Pecharromán, and J. Moya, "High wear resistance white ceramic glaze containing needle like zircon single crystals by the addition of sepiolite n-ZrO2," Journal of the European Ceramic Society, vol. 33, no. 15-16, pp. 3379-3385, 2013.
[5] M. Tite, I. Freestone, R. Mason, J. Molera, M. Vendrell‐Saz, and N. Wood, "Lead glazes in antiquity—methods of production and reasons for use," Archaeometry, vol. 40, no. 2, pp. 241-260, 1998.
[6] M. A. A. Muhamad Nor and N. H. Hazwani Ya’acob, "Development of Decorative Ceramic Glaze from Palm Fiber Ash," Key Engineering Materials, vol. 690, pp. 259-263, 2016.
[7] H. Huang, J. Yu, F. Liu, and H. Zeng, "Preparation of A High-Performance Frit Glaze Using High-Potassium Feldspar," in IOP Conference Series: Earth and Environmental Science, 2021, vol. 943, no. 1: IOP Publishing, p. 012018.
[8] H. B. Poyraz, N. Erginel, and N. Ay, "The use of pumice (pumicite) in transparent roof tile glaze composition," Journal of the European Ceramic Society, vol. 26, no. 4-5, pp. 741-746, 2006.
[9] P. Riello et al., "Nucleation and crystallization behavior of glass-ceramic materials in the Li2O–Al2O3–SiO2 system of interest for their transparency properties," Journal of non-crystalline solids, vol. 288, no. 1-3, pp. 127-139, 2001.
[10] R. J. Revelo, A. P. Menegazzo, and E. B. Ferreira, "Cathode-Ray Tube panel glass replaces frit in transparent glazes for ceramic tiles," Ceramics International, vol. 44, no. 12, pp. 13790-13796, 2018.
[11] F. G. Melchiades, B. T. Rego, S. M. Higa, H. J. Alves, and A. O. Boschi, "Factors affecting glaze transparency of ceramic tiles manufactured by the single firing technique," Journal of the European Ceramic Society, vol. 30, no. 12, pp. 2443-2449, 2010.
[12] R. Eppler, "Use of Scattering Theory to Interpret Optical Data for Enamels," Journal of the American Ceramic Society, vol. 54, no. 2, pp. 116-120, 1971.
[13] I. Atkinson, O. C. Mocioiu, and E. M. Anghel, "A study of zircon crystallization, structure, and chemical resistance relationships in ZrO2 containing ceramic glazes," Boletín de la Sociedad Española de Cerámica y Vidrio, vol. 61, no. 6, pp. 677-685, 2022.
[14] S. Son and K. Kim, "Effect of TiO2 content on crystallization behavior of CaO–Al2O3–SiO2–ZnO glass-ceramic glaze," Ceramics International, vol. 49, no. 9, pp. 13677-13686, 2023.
[15] Y. Long, H. Huang, M. Lv, K. Guan, and C. Peng, "Preparation of transparent glaze enhanced by mullite crystals with branched architecture," Materials Letters, vol. 335, p. 133808, 2023.
[16] J. Zheng, K. Xu, H. Wang, W. Sun, J. Sun, and J. Liu, "Effect of bentonite content on the suspension stability of a glaze slurry and final enamel performance," Ceramics International, vol. 49, no. 6, pp. 9493-9501, 2023.
[17] A. A. Veshareh, P. Mohammadi, A. Elikaei, M. G. Shahraki, G. Rahmani, and M. Ranjbaran, "Laboratory modeling of glazed tiles inoculated with deteriorative fungi isolated from Masjed-e Jāmé Isfahan and evaluation of their impacts," International Biodeterioration & Biodegradation, vol. 178, p. 105559, 2023.
[18] J. Partyka, K. Pasiut, P. Jeleń, J. Michałek, K. Kaczmarczyk, and D. Kozień, "The impact of nano-quartz on the structure of glass-ceramic glazes from the SiO2–Al2O3–CaO–MgO–Na2O–K2O system," Ceramics International, vol. 46, no. 15, pp. 23888-23894, 2020.
[19] C. Holé, Z. Ren, F. Wang, J. Zhu, T. Wang, and P. Sciau, "Study of the growth mechanism of ε-Fe2O3 crystals in Chinese sauce glaze replications," Materials Today Communications, vol. 33, p. 104329, 2022.
[20] C. Xu, W. Li, X. Lu, W. Zhang, X. Liu, and J. Xu, "Potential fingerprints for the usage of botanic ash in the glaze recipes of the Jizhou tea bowl," Journal of the European Ceramic Society, vol. 42, no. 9, pp. 4016-4023, 2022.
[21] T. Hui et al., "Recycling of extracted titanium slag and gold tailings for preparation of self-glazed ceramic foams," Ceramics International, vol. 48, no. 16, pp. 23415-23427, 2022.
[22] F. Gol et al., "Evaluation of solid wastes in the manufacture of ceramic tableware glazes," Ceramics International, vol. 48, no. 11, pp. 15622-15628, 2022.
[23] P. Liu et al., "Analysis of the influence of iron source and its occurrence state on the color of celadon glaze," Ceramics International, vol. 48, no. 13, pp. 18425-18432, 2022.
[24] S. Wang et al., "Anorthite-based transparent glass-ceramic glaze for ceramic tiles: Preparation and crystallization mechanism," Journal of the European Ceramic Society, vol. 42, no. 3, pp. 1132-1140, 2022.
[25] J. Hou et al., "The birth of copper-red glaze: Optical property and firing technology of the glaze from Changsha Kiln (8th–9th century)," Journal of the European Ceramic Society, vol. 42, no. 3, pp. 1141-1148, 2022.
[26] S. Sun et al., "A zirconium-free glaze system for sanitary ceramics with SiO2-CaCO3-TiO2 composite opacifier containing anatase: Effect of interface combination among SiO2, CaCO3 and TiO2," Journal of the European Ceramic Society, vol. 42, no. 5, pp. 2523-2534, 2022.
[27] F. Gol et al., "Reuse of glass waste in the manufacture of ceramic tableware glazes," Ceramics International, vol. 47, no. 15, pp. 21061-21068, 2021.
[28] K. Kaczmarczyk, J. Partyka, K. Pasiut, and J. Michałek, "Strontium carbonate in glazes from the SiO2–Al2O3–CaO–MgO–Na2O–K2O system, sintering and surface properties," Open Ceramics, vol. 9, p. 100233, 2022.
[29] K. Pasiut, J. Partyka, M. Lesniak, P. Jelen, and Z. Olejniczak, "Raw glass-ceramics glazes from SiO2–Al2O3–CaO–MgO–Na2O–K2O system modified by ZrO2 addition–changes of structure, microstructure and surface properties," Open Ceramics, vol. 8, p. 100188, 2021.
[30] S. Sun, H. Ding, W. Ao, Y. Liu, L. Chang, and J. Zhang, "Preparation of a CaCO3-TiO2 composite based opaque glaze: Insight into the mechanism of opacification and glaze yellowing inhibition," Journal of the European Ceramic Society, vol. 40, no. 15, pp. 6171-6180, 2020.
[31] L. B. Ayieng’a, A. Wang, X. Lu, Y. Song, and M. Watterson, "Research on Porcelain Material for Product Design and Manufacturing in Kenya: Assessing SiO 2 Al 2 O 3 Content," 2022.
[32] P. Muñoz, V. Letelier, L. Munoz, O. Gencel, M. Sutcu, and M. Vasic, "Assessing technological properties and environmental impact of fired bricks made by partially adding bottom ash from an industrial approach," Construction and Building Materials, vol. 396, p. 132338, 2023.
[33] M. Jordán, A. Boix, T. Sanfeliu, and C. De la Fuente, "Firing transformations of cretaceous clays used in the manufacturing of ceramic tiles," Applied Clay Science, vol. 14, no. 4, pp. 225-234, 1999.
[34] S. M. Kazmi, S. Abbas, M. A. Saleem, M. J. Munir, and A. Khitab, "Manufacturing of sustainable clay bricks: Utilization of waste sugarcane bagasse and rice husk ashes," Construction and building materials, vol. 120, pp. 29-41, 2016.
[35] M. Levy, T. Shibata, and H. Shibata, Wild Clay: Creating Ceramics and Glazes from Natural and Found Resources. Bloomsbury Publishing, 2022. | ||
|
Statistics Article View: 260 PDF Download: 193 |
||
