ANALYSIS OF THE DESIGN PARAMETERS OF A REMOTE SENSING SATELLITE OPTICAL SENSOR | ||||
The International Conference on Electrical Engineering | ||||
Article 66, Volume 5, 5th International Conference on Electrical Engineering ICEENG 2006, May 2006, Page 1-12 PDF (540.94 K) | ||||
Document Type: Original Article | ||||
DOI: 10.21608/iceeng.2006.33669 | ||||
![]() | ||||
Authors | ||||
Fawzy ElTohamy Hasan1; Mahmoud Fathy Mahmoud2; Ibrahim Aly Abdel Dayem1; Adel El-Nozahy3; Mohamed El-Sayed Abdel Hady4 | ||||
1PhD., Egyptian Armed Forces. | ||||
2Assoc. Prof., Banha High Technology Institute, Banha, Egypt. | ||||
3PhD., National Laser Institute, Cairo University, Giza, Egypt. | ||||
4BSc., Egyptian Armed Forces. | ||||
Abstract | ||||
ABSTRACT: In this paper, the various parameters that affect the design of the optical sensors used in remote sensing satellites are analyzed. The effects of these design parameters on the spatial resolution of remote sensing satellites are discussed. A simulation of a telescope design is implemented using Zemax package. | ||||
Keywords | ||||
optical sensors; spatial resolution; telescope design; Zemax package | ||||
Statistics Article View: 153 PDF Download: 409 |
||||