Estimation of optimum load and thermal response for Oil-Natural-Air- Natural cooling type power transformer
Ngu, S., Thye, H., Kho, L., Chai, K., Kee, S., Shahril, O. (2008). Estimation of optimum load and thermal response for Oil-Natural-Air- Natural cooling type power transformer. EKB Journal Management System, 6(6th International Conference on Electrical Engineering ICEENG 2008), 1-9. doi: 10.21608/iceeng.2008.34300
S. S. Ngu; H. S. Thye; L. C. Kho; K. P. Leslie Chai; S. K. Kee; O. M. Shahril. "Estimation of optimum load and thermal response for Oil-Natural-Air- Natural cooling type power transformer". EKB Journal Management System, 6, 6th International Conference on Electrical Engineering ICEENG 2008, 2008, 1-9. doi: 10.21608/iceeng.2008.34300
Ngu, S., Thye, H., Kho, L., Chai, K., Kee, S., Shahril, O. (2008). 'Estimation of optimum load and thermal response for Oil-Natural-Air- Natural cooling type power transformer', EKB Journal Management System, 6(6th International Conference on Electrical Engineering ICEENG 2008), pp. 1-9. doi: 10.21608/iceeng.2008.34300
Ngu, S., Thye, H., Kho, L., Chai, K., Kee, S., Shahril, O. Estimation of optimum load and thermal response for Oil-Natural-Air- Natural cooling type power transformer. EKB Journal Management System, 2008; 6(6th International Conference on Electrical Engineering ICEENG 2008): 1-9. doi: 10.21608/iceeng.2008.34300

Estimation of optimum load and thermal response for Oil-Natural-Air- Natural cooling type power transformer

The International Conference on Electrical Engineering
Article 61, Volume 6, 6th International Conference on Electrical Engineering ICEENG 2008, May 2008, Page 1-9  XML PDF (109.29 K)
Document Type: Original Article
DOI: 10.21608/iceeng.2008.34300
View on SCiNiTO View on SCiNiTO
Authors
S. S. Ngu1; H. S. Thye1; L. C. Kho1; K. P. Leslie Chai2; S. K. Kee2; O. M. Shahril1
1Universiti Malaysia Sarawak.
2Sarawak Electricity Supply Corporation (SESCo).
Abstract
Abstract:
This paper described the estimation of optimum load and thermal response for the Oilnatural
Air-natural (ONAN) cooling type power transformer with installed load capacity
of 30MVA in Sarawak, Malaysia. The estimation optimum load capacity is based on the
nameplate rating, standard design of the existing transformer and factory acceptance test
report (FAT). This involved loss of life and transformer thermal response such as hotspot
temperature, top-oil temperature, winding temperature and ambient temperature.
By using the existing cyclic load of this transformer, the risk condition of the
transformer could be prevented since capacity load could be estimated. The algorithms
of this project were based on IEEE standard and IEC loading guide for oil-immersed
power transformer.
Keywords
Thermal response; optimum load capacity; hot spot temperature
Statistics
Article View: 154
PDF Download: 254