Enhancing Polymer Matrix Reinforcements: Exploring the Potential of Biologically Modified Clay Minerals in Dyeing, Pigment Dyes, and Wastewater Treatment | ||||
| Journal of Textiles, Coloration and Polymer Science | ||||
| Volume 22, Issue 1, 2025, Page 389-417 PDF (1.37 MB) | ||||
| Document Type: Original Article | ||||
| DOI: 10.21608/jtcps.2024.288767.1371 | ||||
 View on SCiNiTO | ||||
| Authors | ||||
Sara A Ebrahim  1; Ahmed G. Hassabo 2; Hanan Othman1
| ||||
| 1Benha University, Faculty of Applied Arts, Textile Printing, Dyeing and Finishing Department, Benha, Egypt | ||||
| 2National Research Centre (NRC), Textile Research and Technology Institute (TRTI), Pre-treatment and Finishing of Cellulose based Textiles Department (PFCTD), El-Behouth St. (former El-Tahrir str.), Dokki, P.O. 12622, Giza, Egypt | ||||
| Abstract | ||||
| In recent decades, a great deal of study has been done on the use of biologically modified clay minerals as polymer matrix reinforcements. The most popular method for creating organophilic clay is the ammonium surfactant-cation exchange reaction. However, the clay minerals and polymer matrices are not effectively joined by a covalent link created by this type of surface alteration. To establish compatibility and good dispersion between the hydrophilic clay and hydrophobic polymer, a wide range of silane coupling agents has been used. When compared to raw polymers, the resulting polymer/organoclay nanocomposites show notable improvements in their mechanical and physical characteristics. This paper exposures composition, kinds, characteristics, and uses of clay in the fields of dyeing, pigment dyes, and removal of Wastewater. | ||||
| Keywords | ||||
| Clay; Types; Nanocomposite; Application | ||||
|
Statistics Article View: 195 PDF Download: 74 |
||||
