MONITORING SAND PARTICLES IN TWO-PHASE FLOW WITH ACOUSTIC EMISSION | ||||
| The International Conference on Applied Mechanics and Mechanical Engineering | ||||
| Article 45, Volume 15, 15th International Conference on Applied Mechanics and Mechanical Engineering., May 2012, Page 1-15 PDF (4.23 MB) | ||||
| Document Type: Original Article | ||||
| DOI: 10.21608/amme.2012.36955 | ||||
 View on SCiNiTO | ||||
| Authors | ||||
| M. E. El-Alej1; D. Mba2; T. Yan2 | ||||
| 1School of Engineering, Cranfield University, Cranfield, Bedfordshire, MK43 0AL, U.K. corresponder author. | ||||
| 2School of Engineering, Cranfield University, Cranfield, Bedfordshire, MK43 0AL, U.K. | ||||
| Abstract | ||||
| ABSTRACT This paper presents an experimental investigation using acoustic emission (AE) technology to monitor sand transportation in two-phase flow. The initial investigation consisted of a preliminary experiment where a single sand particle was dropped from a height onto metal plates to provide a basis for monitoring particle impingement on metal pipes in two-phase or three-phase flow systems. Further investigations were undertaken on two phase (air-sand) flow in a horizontal pipe for varying Superficial Gas Velocities (VSG). The objective of this research programme is to develop a simple, non-invasive technique for monitoring of sand particle concentration levels in multi-phase flow conditions. The experimental findings show that AE absolute energy can be correlated with the size of sand particles, number of sand particles and VSG. | ||||
| Keywords | ||||
| Acoustic Emission (AE); multi-phase flow; sand monitoring; condition monitoring | ||||
|
Statistics Article View: 126 PDF Download: 269 |
||||
