FORMATION OF ZIRCONIUM TITANATE FROM MULTI-LAYERED STRUCTURE OF ZrO2 AND TiO2 DEPOSITED BY PULSED RAPID THERMAL CHEMICAL VAPOUR DEPOSITION | ||
| The International Conference on Chemical and Environmental Engineering | ||
| Article 30, Volume 4, 4th International Conference On Chemical & Environmental Engineering, May 2008, Pages 496-502 PDF (611.36 K) | ||
| Document Type: Original Article | ||
| DOI: 10.21608/iccee.2008.38420 | ||
| Authors | ||
| KO C. K.1; SONG B. Y.2; LEE W. G.3 | ||
| 1Graduate student, Dpt. of Chemical Engineering, Kangwon National University, Chuncheon, Korea. | ||
| 2Analytic scientist, Central Laboratory, Kangwon National University, Chuncheon, Korea. | ||
| 3Professor, Dpt. of Chemical Engineering, Kangwon National University, Chuncheon, Korea, Tel)+82 11 380 5219. | ||
| Abstract | ||
| ABSTRACT PRTCVD (pulsed rapid thermal chemical vapor deposition) method has been introduced to prepare zirconium titanate (ZrTiO4) films from a multi-layered structure composed of ZrO2 and TiO2 as a primitive oxide, which allows for the preparation of a given film with different element per cycle and precise control over the thickness of the film. The feasibility of PRTCVD was evaluated and it was confirmed that a multi-layered structure composed of different primitive oxides can be easily produced by PRTCVD and transformed into a multi-component single phase oxide such as zirconium titanate by an appropriate thermal annealing process. | ||
| Keywords | ||
| PRTCVD; Zirconium titanate; Multi-layered structure; Thermal annealing | ||
|
Statistics Article View: 127 PDF Download: 204 |
||
