MODELING AND SIMULATION OF DRY FRICTION CLUTCH CONSIDERING DYNAMIC PERFORMANCE | ||||
| Journal of the Egyptian Society of Tribology | ||||
| Volume 21, Issue 4, October 2024, Page 24-33 PDF (524.46 K) | ||||
| Document Type: Original Article | ||||
| DOI: 10.21608/jest.2024.313937.1092 | ||||
 View on SCiNiTO | ||||
| Authors | ||||
Hamdy Abo el Daheb   1; Amr Ali2
| ||||
| 1Mechnical Department, Faculty of Technology & Education, Sohag University, 82524 Sohag, EGYPT. | ||||
| 2Production Technology Department, Faculty of Technology & Education, Sohag University, 82524 Sohag, EGYPT. | ||||
| Abstract | ||||
| Power transmission is an effective mechanical mechanism for changing vehicle speeds from the first speed to the next speed as it requires vehicles to increase the speed while driving. Therefore, clutches are crucial in ensuring effective power transmission and speed change in vehicles. In a conventional transmission, gears are changed by using a clutch to separate and connect the movement and change between gears. It depends entirely on the friction generated between two plates to transmit power, so it is made of a suitable material to perform this task. In this paper , the types of clutches used in vehicles were displayed, transferring motion through friction. The materials from which these clutches are made were also displayed, which depend mainly on friction and the value of the coefficient of friction. MATLAB was used to build a mathematical model to study the clutch's performance. Also, the performance of the clutch was studied under some appropriate parameters. | ||||
| Keywords | ||||
| Modeling; Simulation; MATLAB; Dry friction clutch; and Dynamic performance | ||||
|
Statistics Article View: 148 PDF Download: 225 |
||||
