Analysis Study for the Benefits of Heavy Crude Oil Hydrotreating before Distillation | ||||
| Journal of Petroleum and Mining Engineering | ||||
| Volume 20, Issue 1 - Serial Number 130, 2018, Page 131-141 PDF (943.05 K) | ||||
| Document Type: Original Article | ||||
| DOI: 10.21608/jpme.2021.107585.1102 | ||||
 View on SCiNiTO | ||||
| Authors | ||||
Walaa Osman  1; Abeer Shoaib1; Denny Ng2
| ||||
| 1Department of Petroleum Refining and Petrochemical Engineering, Faculty of Petroleum and Mining Engineering, Suez University, Suez, Egypt | ||||
| 2School of Engineering & Physical Sciences, Heriot-Watt University, Malaysia. | ||||
| Abstract | ||||
| Heavy crude oils contain considerable amounts of contaminants (e.g., sulfur, nitrogen, and heavy metals) and asphaltenes. The high contents of such contaminants in crude oil would decrease the efficiency of the refining process at the distillation column and lead to various problems such as air pollution, corrosion, and catalyst poisoning. Viewing such difficulties, the objective of this paper is to study the effect and performance of the hydrotreating process of heavy crude oil before atmospheric distillation. Such a process is expected to improve the properties of heavy crude oil and consequently increase the efficiency of the refining process. Process simulation of such process was performed via ASPEN HYSYS V.9., based on an existing Egyptian refinery plant with a feedstock of (50/50% mixture of light and heavy Arabian crudes). The process simulation results showed that a significant improvement had been achieved in the characteristics of crude oil after the hydrotreating process (e.g., lower contaminants content, lower density, and higher yield of middle distillates). | ||||
| Keywords | ||||
| heavy crude oil; hydrotreating process; upgrading; process simulation | ||||
|
Statistics Article View: 221 PDF Download: 103 |
||||
