Investigate the Effect of Curing Methods for Different Types of Binder Concrete | ||||
| The International Conference on Civil and Architecture Engineering | ||||
| Volume 15, Issue 15, May 2024, Page 1-1 PDF (231.54 K) | ||||
| Document Type: Original Article | ||||
| DOI: 10.1088/1755-1315/1396/1/012006 | ||||
 View on SCiNiTO | ||||
| Authors | ||||
| Mohamed E Elmasry; Amin A Kotb; Walaa M Shaaban | ||||
| Lecturer, High Institute of Engineering – El shorouk Academy, Cairo, Egypt. | ||||
| Abstract | ||||
| Various curing techniques are typically used to achieve the required concrete strengths. The laboratory results of this study investigate the effects of curing techniques (namely water, air-dry, burlap, membrane, and chemical spray) on compressive strength (Fcu) and indirect tensile strength (Ft) using 200 specimens. To determine the optimum method for concrete curing, two different cement contents were used (350 kg/m3 and 450 kg/m3) with and without chemical admixture (superplasticizer, SP). Compressive and indirect tensile strengths were determined for the four different concrete mixes. Based on the experimental results, adding superplasticizer and increasing the cement content improved the mechanical properties of the concrete mix, as indicated by both compressive and tensile strength. Additionally, it was found that the longer the curing period of the concrete, the higher the Fcu. Furthermore, adding 1% SP has a more significant impact on Fcu than adding 100 kg of cement. | ||||
| Keywords | ||||
| Curing; Cement; Compressive strength; Core test; Tensile strength; Binder; Concrete | ||||
|
Statistics Article View: 68 PDF Download: 33 |
||||
