A Review of Various Methods for Strengthening RC Beams Subjected to Bending Using FRP Sheets, NSM Plates, and Bar
HASSAN, E., Nagy, N., OSMAN, A., Zahran, M. (2024). A Review of Various Methods for Strengthening RC Beams Subjected to Bending Using FRP Sheets, NSM Plates, and Bar. EKB Journal Management System, 15(15), 1-8. doi: 10.21608/iccae.2024.391377
E. A. HASSAN; Nabil. M. Nagy; A. OSMAN; M. S. Zahran. "A Review of Various Methods for Strengthening RC Beams Subjected to Bending Using FRP Sheets, NSM Plates, and Bar". EKB Journal Management System, 15, 15, 2024, 1-8. doi: 10.21608/iccae.2024.391377
HASSAN, E., Nagy, N., OSMAN, A., Zahran, M. (2024). 'A Review of Various Methods for Strengthening RC Beams Subjected to Bending Using FRP Sheets, NSM Plates, and Bar', EKB Journal Management System, 15(15), pp. 1-8. doi: 10.21608/iccae.2024.391377
HASSAN, E., Nagy, N., OSMAN, A., Zahran, M. A Review of Various Methods for Strengthening RC Beams Subjected to Bending Using FRP Sheets, NSM Plates, and Bar. EKB Journal Management System, 2024; 15(15): 1-8. doi: 10.21608/iccae.2024.391377

A Review of Various Methods for Strengthening RC Beams Subjected to Bending Using FRP Sheets, NSM Plates, and Bar

The International Conference on Civil and Architecture Engineering
Volume 15, Issue 15, May 2024, Page 1-8  XML PDF (3.71 MB)
Document Type: Original Article
DOI: 10.21608/iccae.2024.391377
View on SCiNiTO View on SCiNiTO
Authors
E. A. HASSAN1; Nabil. M. Nagy2; A. OSMAN2; M. S. Zahran2
1P.G. student at Military Technical College Cairo, Egypt.
2Department of Civil Engineering, Military Technical College, Cairo, Egypt.
Abstract
Recently, reinforced concrete (RC) structures have been strengthened and rehabilitation flexural using different fiber-reinforced polymer materials in more than technique the primary strengthening methods that researchers have studied, both theoretically and empirically. the first technique is a near-surface mounted (NSM) bar, the subsequent method is using a near-surface mounted (NSM) plate, and the third technique is Externally bonded (EB) sheets using one of the four types of FRP or a combination of them. carbon fiber reinforced polymer (CFRP) in the first, the second using armed fiber reinforced polymer (AFRP), the third using glass fiber reinforced polymer (GFRP), and the last one using basalt fiber reinforced polymer (BFRP) due to that Older buildings need to be maintained and repaired because of their exposure to severe environments, increased applied loads, deterioration of reinforcement from corrosion, damage from design or construction mistakes, and inadequate maintenance. This research intends to give an overview of the literature on the Bending behavior of fiber-reinforced polymer (FRP)enhanced (RC beams) under a variety of approaches; Additionally, Attention was also given to the method of manufacturing, the different types and components of fiber, the mechanical properties, and a comparison of the cost of different strengthening techniques. It sheds light on the methods of retrofitting and its various applications.
Keywords
Flexural; Strengthening; Retrofitted; RC Beams; FRP; CFRP; BFRP; GFRP; AFRP
Statistics
Article View: 158
PDF Download: 130