HIGH TEMPERATURE FATIGUE BENDING PROPERTIES OF LOW CARBON STEEL | ||
| The International Conference on Applied Mechanics and Mechanical Engineering | ||
| Article 55, Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., May 2008, Pages 84-95 PDF (306.48 K) | ||
| Document Type: Original Article | ||
| DOI: 10.21608/amme.2008.39301 | ||
| Authors | ||
| HASSAN M. Y.; ALI A.; SAPUAN S. M.; HOO C. B. | ||
| Department of Mechanical and Manufacturing Engineering, Universiti Putra Malaysia, 43400 Serdang, Selangor, Malaysia. | ||
| Abstract | ||
| ABSTRACT High temperature fatigue bending properties of low carbon steel was studied. Tests were carried out on a constant speed of 50Hz (3000rpm) at 300°C and 500°C by decreasing stress amplitudes. The investigation was performed based on the stress-life (S-N) approach for high cycle fatigue regime, to establish the empirical equations for fatigue strength and endurance limit. The endurance limit for 300°C is 249.9MNm-2 with knee at 10.03 million cycles while for 500°C it is expected to occur on 171.0MNm-2 at 43.29 million cycles. For low carbon steel test at even higher temperature will experience further drastic drop in fatigue strength. | ||
|
Statistics Article View: 139 PDF Download: 118 |
||
