MATERIAL FLOW IN FLEXIBLE MANUFACTURING | ||||
The International Conference on Applied Mechanics and Mechanical Engineering | ||||
Article 116, Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., May 2008, Page 111-120 PDF (428.02 K) | ||||
Document Type: Original Article | ||||
DOI: 10.21608/amme.2008.39731 | ||||
![]() | ||||
Authors | ||||
KOŠŤÁL P.1; MUDRIKOVÁ A.2; VELÍŠEK K.3 | ||||
1Assoc. Prof., Institute of Production Systems and Applied Mechanics, Slovak University of Technology, Rázusova 2, 917 01 Trnava, Slovak Republic. | ||||
2Senior lecturer, Institute of Production System and Applied Mechanics, Slovak University of Technology, Rázusova 2, 917 01 Trnava, Slovak Republic. | ||||
3Full professor, Institute of Production Systems and Applied Mechanics, Slovak University of Technology, Rázusova 2, 917 01 Trnava, Slovak Republic. | ||||
Abstract | ||||
ABSTRACT The flexible manufacturing system contains some CNC machine tools supported by industrial robot for material handling. This system is designed to manufacturing a group of similar workpieces. The system is characterized by its internal material and information flow. The manufacturing process represents a complex dynamical process included technological, manipulation and control operations. | ||||
Keywords | ||||
Material flow; Information flow; Flexible manufacturing; Automation | ||||
Statistics Article View: 163 PDF Download: 212 |
||||