Conservation of a Wooden Coffin Covered with a Black Resin Layer and Colored Materials from 26th Dynasty-Egypt | ||||
| Advanced Research in Conservation Science | ||||
| Article 1, Volume 5, Issue 2, December 2024, Page 1-12 PDF (897.18 K) | ||||
| Document Type: Original Article | ||||
| DOI: 10.21608/arcs.2024.246869.1042 | ||||
 View on SCiNiTO | ||||
| Authors | ||||
Abdelmoniem Mohammed   1; Naglaa Mahmoud 2; wael S. mohamed3; mostafa Ahmed Abdelfatah4
| ||||
| 1Conservation Department, Faculty of Archaeology, Fayoum University, Fayoum, Egypt | ||||
| 2Conservation Department, Faculty of Archeology, Fayoum University, Egypt | ||||
| 3Polymer department, National Research Centre, Dokki - Giza – Egypt | ||||
| 4Ministry of Tourism and Antiquities, Egypt | ||||
| Abstract | ||||
| This paper aims to document the conservation processes of a polychrome wooden coffin from Saqqara dating back to the late period. The exterior part of the coffin is decorated with a painted layer, while the interior part is covered with a layer of the black resin decorated with a depiction of Nut, the goddess of the sky. The coffin was in a bad state of preservation. It was covered with a thick layer of dust, loose fragments of the painted and gesso layers, moreover, some parts of these layers were lost. Several areas were missing from the foot area of the coffin lid. 2D illustrations and 3D modules were made to document the coffin. The conservation processes of the wooden coffin included mechanical and chemical cleaning, reattachment of the separated parts of the ground layer and painted layers, filling the edge of the painted layer, and consolidating the black resin layer. The materials used in these processes exhibited stability and high retrievability, as confirmed by multiple researchers. The conservation process included mechanical cleaning using soft brushes, chemical cleaning using ethyl alcohol and water for the painted layer and xylene and water for the black resin layer, stabilization of the separated gesso layer was performed using primal AC33, filling cracks of the gesso layers using glass microballoon with Paraloid B72, consolidating the painted layer was achieved using Klucel E and the black resin layer with Nano Paraloid B72. | ||||
Highlights | ||||
• 2D Documentation was used for the decorated coffin. • Photogrammetric documentation was made before and after the restoration to document the coffin for future generations. • Xylene and distilled water (1:1) were used for cleaning the black resin layer. • Nano paraloid B72 in xylene 1.5% was used for consolidating the black resin layer. | ||||
| Keywords | ||||
| Polychrome wooden coffin; late period; deterioration; black resin; Photogrammetric documentation; conservation techniques | ||||
|
Statistics Article View: 211 PDF Download: 231 |
||||
