Corrosion inhibition of carbon steel by utilizing 1-(α-naphthoxyacetyl)-4-ethyl-3-thiosemicarbazide in 1M HCl solution
Belal, K., El-Askalany, A., El-Gammal, O., Salem Molouk, A. (2023). Corrosion inhibition of carbon steel by utilizing 1-(α-naphthoxyacetyl)-4-ethyl-3-thiosemicarbazide in 1M HCl solution. EKB Journal Management System, 60(2), 48-55. doi: 10.21608/mjcc.2023.411540
Kamelia Belal; A.H. El-Askalany; O.A. El-Gammal; Ahmed Fathi Salem Molouk. "Corrosion inhibition of carbon steel by utilizing 1-(α-naphthoxyacetyl)-4-ethyl-3-thiosemicarbazide in 1M HCl solution". EKB Journal Management System, 60, 2, 2023, 48-55. doi: 10.21608/mjcc.2023.411540
Belal, K., El-Askalany, A., El-Gammal, O., Salem Molouk, A. (2023). 'Corrosion inhibition of carbon steel by utilizing 1-(α-naphthoxyacetyl)-4-ethyl-3-thiosemicarbazide in 1M HCl solution', EKB Journal Management System, 60(2), pp. 48-55. doi: 10.21608/mjcc.2023.411540
Belal, K., El-Askalany, A., El-Gammal, O., Salem Molouk, A. Corrosion inhibition of carbon steel by utilizing 1-(α-naphthoxyacetyl)-4-ethyl-3-thiosemicarbazide in 1M HCl solution. EKB Journal Management System, 2023; 60(2): 48-55. doi: 10.21608/mjcc.2023.411540

Corrosion inhibition of carbon steel by utilizing 1-(α-naphthoxyacetyl)-4-ethyl-3-thiosemicarbazide in 1M HCl solution

Mansoura Journal of Chemistry
Volume 60, Issue 2, March 2023, Page 48-55  XML PDF (1.1 MB)
Document Type: Original Article
DOI: 10.21608/mjcc.2023.411540
View on SCiNiTO View on SCiNiTO
Authors
Kamelia Belal* 1; A.H. El-Askalany1; O.A. El-Gammal2; Ahmed Fathi Salem Molouk1
1Department of Chemistry, Faculty of Science, Mansoura University
2Department of Chemistry, Faculty of Science, Mansoura University, Mansoura
Abstract
The current study examines the use of 1-(naphthoxyacetyl)-4-ethyl-3-thiosemicarbazide (H2NAET) as an inhibitor against corrosion in 1 M HCl. Mass loss (ML) and potentiodynamic polarization (PP) studies are two methods used to confirm the tested compound's inhibitory effect. The results show that increasing the temperature and inhibitor concentration improved inhibition potency. The adsorption of H2NAET on carbon steel follows the Langmuir adsorption isotherm and the inhibitor functions as mixed corrosion inhibitor. Atomic force microscopy (AFM) was used to analyze the surface. The gathered data showed that a preservative layer of the inhibitor had developed on the surface of the carbon steel.
Keywords
CS; H2NAET; HCl
Statistics
Article View: 66
PDF Download: 49