Facile fabrication of sulfamic acid / Al-MIL-53 for Congo red removal | ||||
Mansoura Journal of Chemistry | ||||
Volume 45, Issue 3, August 2019, Page 30-39 PDF (1.18 MB) | ||||
Document Type: Original Article | ||||
DOI: 10.21608/mjcc.2019.413013 | ||||
![]() | ||||
Authors | ||||
Awad I. Ahmed* ; Ossama Elbanna; Alzahraa Mohamed | ||||
Chemistry Department, Faculty of Science, Mansoura University, Mansoura, Egypt | ||||
Abstract | ||||
Solvothermal method was used for preparation of AL-MIL-53 MOF and modified by different amounts of sulfamic acid (SA= 15, 25, 30, 50, and 60%) by impregnation method. MOFs were characterized by Fourier transform infrared spectrometry. This technique confirmed successful loading of sulfamic acid onto Al-MIL-53. The prepared samples were applied to the adsorption of Congo red dye (CR) from wastewater. The amount of adsorption increases by increasing amount of SA till reaches to 25%SA/MIL-53. After this percent of SA, the amount of adsorption decreases. It was obvious that the best adsorption occurs at pH=2. The isotherms and kinetics data were represented by Langmuir adsorption isotherm and pseudo 2nd order kinetic model. | ||||
Keywords | ||||
MOFs; Al-MIL-53; sulfamic acid; Adsorption; Congo red | ||||
Statistics Article View: 42 PDF Download: 23 |
||||