Optimizing Growth Conditions and Polyhydroxybutyrate Production in Spirulina platensis and Haematococcus pluvialis for Sustainable Bioplastic Development | ||||
| Egyptian Journal of Aquatic Biology and Fisheries | ||||
| Article 112, Volume 29, Issue 2, March and April 2025, Page 1607-1629 PDF (1.03 MB) | ||||
| DOI: 10.21608/ejabf.2025.420706 | ||||
 View on SCiNiTO | ||||
| Author | ||||
| Morsy et al. | ||||
| Abstract | ||||
| Bioplastics are increasingly being recognized as a viable substitute for conventional plastics across a broad spectrum of applications. Microalgae, such as Spirulina platensis (Geitler) and Haematococcus pluvialis (Flotow), are emerging as sustainable sources for bioplastic production, aligning with the principles of a circular bioeconomy. This study employed response surface methodology (RSM) to optimize growth conditions for bioplastic-producing microalgae, Spirulina platensis and Haematococcus pluvialis, with the aim of maximizing polyhydroxybutyrate (PHB) accumulation. The results showed that aerated Zarrouk's medium optimized S. platensis growth at 20°C, pH 8, 5000 lux, and 0.025 M salinity, while medium growth was optimized at 30°C, pH 9, 5000 lux, and 0.3 M salinity. In contrast, aerated BG11 medium optimized H. pluvialis growth at 26.5°C, pH 7.9, 6500 lux, and 0 M salinity, with medium growth optimized at 27.5°C, pH 5.5, 3500 lux, and 0.2 M salinity. Notably, H. pluvialis under medium growth conditions yielded the highest PHB content (61.04±0.3mg/ g), whereas S. platensis under maximum growth conditions yielded the lowest PHB content (20.43±0.56mg/ g). Furthermore, PHB production was significantly enhanced for H. pluvialis by the addition of sodium acetate in phosphorus-deficient media, reaching a maximum of 197.58±0.6mg/ g with 2g/ L acetate. | ||||
| Keywords | ||||
| Bioplastic; Microalgae; Polyhydroxybutyrate (PHB); Response surface methodology (RSM) | ||||
|
Statistics Article View: 186 PDF Download: 169 |
||||
