IMPROVING ACIDIZING TREATMENT IN KHALDA OIL FIELDS | ||||
| Journal of Al-Azhar University Engineering Sector | ||||
| Volume 20, Issue 75, April 2025, Page 474-494 PDF (852.78 K) | ||||
| Document Type: Original Article | ||||
| DOI: 10.21608/auej.2025.357028.1768 | ||||
 View on SCiNiTO | ||||
| Authors | ||||
Hany Abdelnaaem Kotb  1, 2; Ramadan Nasr Emara1; Abdel Wahab Abdel Hameed Bayoumi1
| ||||
| 1Mining and Petroleum Engineering Department, Faculty of Engineering, Al-Azhar University, Egypt | ||||
| 2Khalda Petroleum Company, Egypt | ||||
| Abstract | ||||
| This field case study focuses on the enhancement of acidizing efficiency in the Alamein-Dolomite reservoir (Western Desert, Egypt) using plain (regular) HCl. The impact of various design parameters and conditions on stimulation efficiency is analyzed using a commercial design simulator (StimCADE), focusing on factors such as acid concentration, injection rate, and dosage. Additionally, an artificial neural network (ANN) is developed from the simulation results and successfully forecasts the productivity index (PI) with a high accuracy. Key findings indicate that optimal acidizing occurs within the temperature range of 200°F to 220°F, with minimal impact above 220°F. A 20% acid concentration is effective across a wide temperature range (200°F–300°F). For maximum skin factor reduction, a 15% concentration with maximum acid dosage is recommended, though cost-effectiveness must be considered. The optimal acid injection rates are 0.5 bpm for concentrations up to 15%, 1.0 bpm for 20%, and 1.5 bpm for 28%. For acid dosages above 200 gal/ft, a rate exceeding 0.5 bpm is beneficial. These findings provide guidelines for the design and implementation of acidizing treatments in oil fields, improving their efficiency and maximizing well productivity for dolomite reservoirs. | ||||
| Keywords | ||||
| matrix acidizing; dolomite reservoir; plain HCl; guidelines | ||||
|
Statistics Article View: 131 PDF Download: 84 |
||||
