Numerical Study of the Effect of using a Small Fence through the Flow Passage on the Performance of a Langston Turbine Cascade | ||||
| JES. Journal of Engineering Sciences | ||||
| Article 6, Volume 53, Issue 5, September and October 2025, Page 158-173 PDF (1.12 MB) | ||||
| Document Type: Research Paper | ||||
| DOI: 10.21608/jesaun.2025.356918.1417 | ||||
 View on SCiNiTO | ||||
| Authors | ||||
Mostafa Kamal  ; Magdy Bassily; Ramadan Bassiouny ; Gamal Abo Elyamin
| ||||
| Mechanical Engineering Power and Energy Department, Faculty of Egineering, Minia University, Minia, Egypt | ||||
| Abstract | ||||
| The present study computationally investigates the steady incompressible flow behavior through Langston turbine cascade. A three dimensional numerical model was developed by ANSYS-Fluent software. The model solves the RANS governing equations along with the transition-SST (4eq.) model. The results of the model have been validated using experimental data obtained by Langston. A proposed configuration to improve the turbine performance is adopted using fence mounted close to the leading edge. The function of the fence is to reduce the pressure losses and accordingly improve the turbine performance. The results showed that the total pressure loss coefficient decreased by 5.244 % according to fence addition. The fence effectively disrupted the horseshoe vortex and modified the pressure flow field, leading to a weakened passage vortex and suppressed secondary flow. Adding a fence resulted in an enhancement of the flow uniformity and reduction of the vortex strength with improvements in the aerodynamic efficiency of the turbine cascade. | ||||
| Keywords | ||||
| Turbine cascade; Total pressure loss; CFD; Fence | ||||
| References | ||||
|
[1] Denton, J.D., Loss mechanisms in turbomachines. Vol. 78897. 1993: American Society of Mechanical Engineers.
[2] Cho, J.-J., K.-S.J.J.o.t.K.S.f.A. Kim, and S. Sciences, Controlling the Horseshoe Vortex by the Leading-Edge Fence at a Generic Wing-Body Junction, Journal of Korean Society, 2009. 37(4): p. 336-343.
[3] Langston, L. S., Secondary flows in axial turbines—a review, Annals of the New York Academy of Science, 2001. 934(1): p. 11-26.
[4] Langston, L., M. Nice, and R. Hooper, Three-dimensional flow within a turbine cascade passage, J, Eng, Power, 1977. Vol. 99, pp. 21-28
[5] Langston, L., Crossflows in a turbine cascade passage, J. Engineer for Power, 1980. 102, pp. 866–874.
[6] Ryong, K.S. and J. Moon Young, Counter-Rotating Streamwise Vortex Formation in the Turbine Cascade with Endwall Fence, Computers and Fluids, 1999: p. 155-161.
[7] Govardhan, M., A. Rajender, and J.J.J.o.T.S. Umang, Effect of streamwise fences on secondary flows and losses in a two-dimensional turbine rotor cascade, J. Thermal Science, 209. 15: p. 296-305.
[8] Nandan Kumar, K. and M.J.J.o.F.E. Govardhan, On topology of flow in a turbine cascade, Jouranal of FLuids Engineering, 2014. 136(8): p. 081201.
[9] Adeola S. Shote, Gazi I. Mohamed, Josua P. Meyer, Influences of large fillets on endwall flows in a vane cascade with upstream slot film-cooling, Experimental Thermal and Fluid Scienc, 2020. 112: p. 109951.
[10] Cui, T., Wang, S, Tang, X., Wen, F., Wang, Z., Effect of leading-edge optimization on the loss characteristics in a low-pressure turbine linear cascade, J. of Thermal Science, 2019. 28: p. 886-904.
[11] Aunapu, N.V., Volino, R. J., Flack, K. A., and Stoddard, R. M.., Secondary flow measurements in a turbine passage with endwall flow modification, J. Turbomachines, 2000. 122(4): p. 651-658.
[12] Miao, X., Zhang, Q., Wang, L., J., Qi, H., Application of riblets on turbine blade endwall secondary flow control, Aerospace Research Central, 2015, V31(6): p. 1578-1585.
[13] Ingram, G., Gregory, D., Rose, M., Havey, N., Brennan, G., The effect of end-wall profiling on secondary flow and loss development in a turbine cascade in Turbo Expo: Power for Land, Sea, and Air, ASME, 2002.
[14] Ingram, G., Gregory, D., Rose, M., Havey, The benefits of turbine endwall profiling in a cascade, J. of Power and Energy, 2005. 219(1): p. 49-59.
[15] Nho, Y.C., P, J. S., Lee, Y. J., Kwak, J. S., Effects of turbine blade tip shape on total pressure loss and secondary flow of a linear turbine cascade, Int. J. of Heat and Fluid Flow, 2012. 33(1): p. 92-100.
[16] Li, X., Ji, L., Zhou, L., Numerical research on the trailing-edge sweep of supersonic/transonic turbines, Aerospace Science and Technology, 2020. 99: p. 105696.
[17] Halder, P. and P.M.J.O.e. Kumar, Coupled CAD-CFD automated optimization for leading and trailing edge of an axial impulse turbine blade, Ocean Engineering, 2020. 213: p. 107769.
[18] Ansys Fluent Theory Guide, ANSYS, Inc. Release 2021 R2 Southpointe July 2021 2600 Ansys Drive Canonsburg, PA 15317 ANSYS, Inc. and ansysinfo@ansys.com Ansys Europe, Ltd. are UL http://www.ansys.com
[19] Ahmed Abdelnaby Abdelhameed; Saleh Abo-Elfadl Ahmed; Othman Hassan Othman; Abdel Moneim Mahmoud Ibrahim. "Influence of using Straight and Twisted Elliptical Section Heater Tubes on Stirling Engine Performance". JES. Journal of Engineering Sciences, 50, 6, 2022, 11-30. doi: 10.21608/jesaun.2022.150787.1155
[20] Ahmed Ibrahim; Othman Hassan; Mohamed El-Dosoky; Moahmed Abdelghany. "Numerical Investigation of Film Cooling Effectiveness and Flow Field Characteristics over a Flat Plate with in-Hole Swirl Generator". JES. Journal of Engineering Sciences, 51, 6, 2023, 53-80. doi: 10.21608/jesaun.2023.221981.1244
[21] Ahmed Hussien; Ahmed Ali; Ibrahim Ismail. "Comparative Investigation of the Energy Efficiency of Mini-Split Air Conditioning with Variable Refrigerant Flow Systems for Office Buildings in Hot Climate.". JES. Journal of Engineering Sciences, 52, 2, 2024, 52-72. doi: 10.21608/jesaun.2024.244895.1276 | ||||
|
Statistics Article View: 1,360 PDF Download: 290 |
||||
