Effect of Different CAD/CAM Techniques on Marginal accuracy, Color matching and Retention of Cemented versus Screw retained Implant-supported Crowns.
Elbanna, L., Essam, E., AL-Yasaky, M., Katamish, H. (2640). Effect of Different CAD/CAM Techniques on Marginal accuracy, Color matching and Retention of Cemented versus Screw retained Implant-supported Crowns.. EKB Journal Management System, 2019(10), -. doi: 10.21608/adjg.2019.5480.1019
Latifa Elbanna; Eman Essam; Mohamed AL-Yasaky; Hisham Katamish. "Effect of Different CAD/CAM Techniques on Marginal accuracy, Color matching and Retention of Cemented versus Screw retained Implant-supported Crowns.". EKB Journal Management System, 2019, 10, 2640, -. doi: 10.21608/adjg.2019.5480.1019
Elbanna, L., Essam, E., AL-Yasaky, M., Katamish, H. (2640). 'Effect of Different CAD/CAM Techniques on Marginal accuracy, Color matching and Retention of Cemented versus Screw retained Implant-supported Crowns.', EKB Journal Management System, 2019(10), pp. -. doi: 10.21608/adjg.2019.5480.1019
Elbanna, L., Essam, E., AL-Yasaky, M., Katamish, H. Effect of Different CAD/CAM Techniques on Marginal accuracy, Color matching and Retention of Cemented versus Screw retained Implant-supported Crowns.. EKB Journal Management System, 2640; 2019(10): -. doi: 10.21608/adjg.2019.5480.1019

Effect of Different CAD/CAM Techniques on Marginal accuracy, Color matching and Retention of Cemented versus Screw retained Implant-supported Crowns.

Al-Azhar Journal of Dentistry
Volume 2019, Issue 10, October 2019  XML
DOI: 10.21608/adjg.2019.5480.1019
View on SCiNiTO View on SCiNiTO
Authors
Latifa Elbanna1; Eman Essam2; Mohamed AL-Yasaky3; Hisham Katamish4
1Department of Dentistry ,AlZahraa University Hospital ,AlAzhar university , Cairo -Egypt
2Crown and Bridge Department- AlAzhar University- Cairo -Egypt
3Professor of Operative Dentistry and Dean of Faculty of Dental Medicine Sinai University
4Fixed Prosthodontics, Cairo University- Cairo-Egypt
Abstract
Purpose: Evaluating the effect of different computer aiding designing/computer aiding manufacturing techniques on marginal accuracy, color matching and retention of cemented versus screw retained implant-supported crowns. Materials and Methods: Thirty six zirconia implant supported crowns were constructed and divided according to mode of retention into two groups (n=18/group);GpI:Implants supported crowns cement retained to customized zirconia abutments. GpII : Implant-supported crowns screwed directly to implant analogs. Each of the two groups were further subdivided according to mode of veneering into three subgroups(n=6/group).(IA)Full Contoured cement retained zirconia crowns (IB)Solid Zirconia copings veneered by Hand layering&(IC)Solid Zirconia coping veneered by Heat pressed ingots.(IIA)Full contoured screw retained zirconia crowns(IIB)&(IIC)Solid Zirconia copings manufactured and veneered as cement retained but they were screwed directly to implant analog. Marginal accuracy, color matching and retention was measured. Results :Press veneered cement retained subgroup(IC)showed the biggest marginal gap value, while full contoured screw retained subgroup(IIA)showed the smallest. Cement retained hand veneered(IB)showed the highest statistically significant color matching acceptance(50% good, 16.67% fair,33.3%adjust).Screw retained group[II] showed statistically significant lower retention mean value than cement retained group[I].The highest statistically significant retention mean value was recorded by press veneered subgroups [C] . Conclusion: While cement retained showed better color matching and resistance to dislodgment than screw retained zirconia CAD/CAM implant supported crowns but the later showed better adaptation. Full contoured showed lowest marginal gap, hand veneered showed highest color matching acceptance and press veneered showed the highest retention mean values.
Keywords
CAD/CAM Implant superstructure; Veneering techniques; Retention, Color; marginal accuracy
Statistics
Article View: 27