Geomechanical Study of Rock Properties in the Kafr El-Sheikh Formation at Sapphire Field, West Delta Deep Marine, Egypt | ||
| Al-Azhar Bulletin of Science | ||
| Volume 2024, Issue 8, August 2024 | ||
| DOI: 10.58675/2636-3305.1674 | ||
| Authors | ||
| Moustafa Mohamed Ahmed Attia1; Ali El-Sayed Farag2; Mahmoud Zein El-Din3 | ||
| 1Halliburton World Wide Limited Company, Kuwait | ||
| 2Halliburton World Wide limited Company, UAE | ||
| 3Geology Department, Faculty of Science, Al Azhar University, Cairo, Egypt | ||
| Abstract | ||
| Numerous challenges were encountered during the drilling operations conducted at the Sapphire oilfield. Instances of stuck pipe, wellbore instability, breakouts, and washouts have been documented in many wells within this field, resulting in unproductive time and additional expenditures. To mitigate these challenges, it is important to conduct a one-dimensional geomechanical model to get a viable resolution. This entails the creation of three primary in situ stress profiles and the assessment of mechanical characteristics of the geological formations. The primary focus of this investigation was to ascertain the mechanical characteristics of the rock. Therefore, this work offers great input while building a comprehensive one-dimensional mechanical earth model in a set of wells situated in the Sapphire field, which is situated inside the West Delta Deep Marine region. Nevertheless, the understanding of these values is impeded by the lack of extensive rock mechanics testing data, encompassing both mechanical and elastic characteristics. The rock's mechanical properties were calculated using empirical equations due to the lack of core sample data, which required using wireline data instead. The unconfined compressive strength in the present study was calculated based on Young's modulus correlation, initially developed by Dick Plumb, and it showed a good correlation with the well events. Using the rocks' geomechanical properties helps explain the formation's fracability and shows how likely it is to collapse. The occurrence of wellbore instability issues is more probable in shale intervals compared with other geological formations. These results revealed that the shale beds are most likely to fail as Poisson's ratio and Young's modulus of shale are all rather high, but they have a lower friction angle. Hence, to prevent instability issues, the proposed wells must be meticulously engineered. | ||
|
Statistics Article View: 18 |
||
