A Dual-Source Energy Harvesting Architecture for Smart Sensors: PV and 5.8 GHz Rectenna Integration | ||
| Advanced Sciences and Technology Journal | ||
| Articles in Press, Accepted Manuscript, Available Online from 22 August 2025 | ||
| Document Type: Original Article | ||
| DOI: 10.21608/astj.2025.402398.1087 | ||
| Authors | ||
| Ahmed Khairy1; Mohammed AlThuwaini1; Islam M. Ibrahim* 2 | ||
| 11Electrical Engineering Department King Fahad University for Petroleum and Minerals (KFUPM) Dhahran, Saudi Arabia | ||
| 2Software engineering,faculty of engineering,egyptian chinese university,cairo,egypt | ||
| Abstract | ||
| This paper presents a hybrid energy harvesting system combining photovoltaic (PV) and 5.8 GHz RF rectenna sources to provide continuous power for low-energy smart sensors. A 4×4 microstrip patch antenna array is developed and integrated with a voltage doubler rectifier using Schottky diodes, achieving a peak power conversion efficiency of 81.75% at 10 dBm input power. In parallel, a PV module modeled in Simulink delivers up to 6 W, with a maximum power point at 17.1 V and 3.5 A. To resolve the voltage mismatch between the PV and RF sources whose rectifier output reaches approximately 3.5 V individual DC-DC converters are used for each source, and their outputs are unified via a power management unit (PMU). The integrated system ensures a stable and efficient supply of energy, harvesting up to 30–35 Wh. This dual-source architecture enhances energy reliability and supports autonomous sensor operation under variable lighting and RF exposure conditions. It offers a robust solution for sustainable IoT deployments, especially in remote environments, paving the way for long-life, self-powered smart electronics. | ||
| Keywords | ||
| Schottky diode; Power management unit (PMU); Voltage doubler; Power conversion efficiency (PCE); Autonomous operation | ||
|
Statistics Article View: 123 |
||
