Simplified Analysis and Applications of Single Mode Active Directional Coupler with Parallel Electrodes
Zaghlou, A., El-Awady, R., Kamel, S., Mahfouz, S. (2009). Simplified Analysis and Applications of Single Mode Active Directional Coupler with Parallel Electrodes. EKB Journal Management System, 19(1), 47-62. doi: 10.21608/mjeer.2009.65239
Adel l Zaghlou; Rasheed El-Awady; Sayed Kamel; Sohair Mahfouz. "Simplified Analysis and Applications of Single Mode Active Directional Coupler with Parallel Electrodes". EKB Journal Management System, 19, 1, 2009, 47-62. doi: 10.21608/mjeer.2009.65239
Zaghlou, A., El-Awady, R., Kamel, S., Mahfouz, S. (2009). 'Simplified Analysis and Applications of Single Mode Active Directional Coupler with Parallel Electrodes', EKB Journal Management System, 19(1), pp. 47-62. doi: 10.21608/mjeer.2009.65239
Zaghlou, A., El-Awady, R., Kamel, S., Mahfouz, S. Simplified Analysis and Applications of Single Mode Active Directional Coupler with Parallel Electrodes. EKB Journal Management System, 2009; 19(1): 47-62. doi: 10.21608/mjeer.2009.65239

Simplified Analysis and Applications of Single Mode Active Directional Coupler with Parallel Electrodes

Menoufia Journal of Electronic Engineering Research
Article 2, Volume 19, Issue 1, January 2009, Page 47-62  XML
Document Type: Original Article
DOI: 10.21608/mjeer.2009.65239
View on SCiNiTO View on SCiNiTO
Authors
Adel l Zaghlou1; Rasheed El-Awady2; Sayed Kamel1; Sohair Mahfouz1
1Electronics & Communications Engineering Dept, Faculty of Eng., Zagazig University, Egypt.
2Electronics & Communications Engineering Dept., Faculty of Eng., El-Mansoura Univ., Egypt.
Abstract
In this work, a method of analysis for directional coupler device is proposed.   Normally, directional coupler operates at lower values of normalized frequency "Vx". So, the corresponding normalized propagation constant "bx" becomes approximately in logarithm to relation to Vx.  Therefore, the simplified model is used to find the propagation constant, coupling coefficient and their changes with the controlled voltage.  As illustrative applications, the proposed method is applied to the power divider/combiner ratios, the bandpass wavelength filter and three waveguides directional coupler. The analysis of the electro-optically controlled directional coupler becomes simple with more evidence and very good agreement. The effect of the controlled voltage on the coupling coefficient is very weak so, the output power of the directional coupler is affected by the change of propagation constants (i.e. by the controlled voltage).
References
[1]           Adel Zaghloul, "Directional Coupler as an Electrooptically Controlled Wavelength Division Demultiplexer," 23th Radio Science Conference, NRSC, Ain Shams, pp. 544 -550, March 2007.

[2]           Chung Ho Kwan and Kin Seng Chiang, “Study of Polarization-Dependent Coupling in Optical Waveguide Directional Couplers by the Effective Index Method with Built-in Perturbation Correction,” J. Lightwave Technol., Vol.20, No.6, pp. 1018-1026, June 2002.

[3]           H. Z. Hu, J Chen, J. S.Yang, and F. Geng, “Structural Auto-Optimization of Integrated Optical Directional Coupler Polarization Splitters and Reflectors,” J. Lightwave Technol., Vol.20, No.5, pp. 840-844, May 2002.

[4]           R. Hereth and G. Schiffner, "Broad-Band Optical Directional Couplers and Polarization Splitters," J. Lightwave Technol., Vol.7, No.6, pp.925-930, June 1989.

[5]           Hiroshi  Nishhara, Masamitsu Haruna, and Toshiashi  Suhara,  “Optical Integrated Circuits,” McGraw  Hill   Book Company, New-York, Ch.2, 2nd  editin 1989.

[6]           Dietrich Marcuse, “Theory of Dielectric Optical Waveguides,” AT&T  New-York, Ch. 8, pp. 330-334, 2nd edition, 1991.

[7]           Huawei Liang, Shuaxing Shi, and Lin Ma, "Coupled Mode Theory of Nonparallel Optical Waveguides," J. Lightwave Technol., Vol. 25, No.8,  pp. 2233-2235,  2007.

[8]           A. N. Kireev and Thomas Graf, "Vector Coupled Mode Theory of Dielectric Wave-guides," IEEE J. Quantum Electronics, Vol.39, No.7, pp. 866-873, jul. 2003.

[9]           Athanasion Theocharidis, Thomas Kamalakis, and Thomas Sphicopoulos, "Accuracy of Coupled Mode Theory and Mode Matching Method in the Analysis of Photonic Crystal Waveguide Perturbations" J. Lightwave Technol., Vol.25, No.10,  pp. 2193-3201,  Oct. 2007.

[10]       Manfred Hammer, "Hybrid Analytical/Numerical Coupled-Mode Modeling of Guided-Wave Device," J. Lightwave Technol., Vol25, No.9, pp. 2287-2298, Sep. 2007.

[11]       Dietrich Marcuse, “Directional Couplers Made of Nonidentical Asymmetric Slabs.  Part I: Synchronous Couplers,” J.  Lightwave Technol., Vol. LT-5, No.1, pp. 113-118, Jan.1987.

[12]       Adel Zaghloul, "Analysis of Anisotropic Rectangular Waveguide as an Isotropic Waveguide" 23th Radio Science Conference, NRSC, Ain Shams,  pp. 544-550,  March 2007.

[13]       A. M. Zaghloul, “A Simple Analysis of a Multimode Three Optical Slab Waveguide Directional Coupler,” 18th Radio Science Conference, Alexandria, pp.544-552, March  2002                                                         

[14]       Office of the Manager National Communication System (NSC TIB 00-3),            "Wavelength Division Multiplexing (WDM) Networks," National Communication System (NSC TIB 00-3) pp. 1-5, Feb. 2000.

[15]       N. Anwar and  B. M. Azizur Rahman  “Design Consideration for an Electrooptic Directional Coupler Modulator,” J.  Lightwave Technol., Vol.17, No.4, pp. 598-605, April 1999.

[16]       Matteo Dainese, Marcin Swillo, Lech Wosinski and Lars Thylen, “Directional Coupler Wavelength Selective Filter Based on Dispersive Bragg reflection Waveguide," Optics Comm. 260, pp. 514-521 2006.

Statistics
Article View: 143