ADAPTIVE FUZZY CONTROL FOR INDUCTION MOTOR DTC WITH ON LINE STATOR RESISTANCE DETECTION | ||||
| ERJ. Engineering Research Journal | ||||
| Article 2, Volume 35, Issue 3, July 2012, Page 197-203 PDF (573.96 K) | ||||
| Document Type: Original Article | ||||
| DOI: 10.21608/erjm.2012.67170 | ||||
 View on SCiNiTO | ||||
| Authors | ||||
| M.M.A. Mahfouz; Mohamed Mahmoud Ismail | ||||
| Faculty of Engineering, Helwan, Helwan University | ||||
| Abstract | ||||
| Direct torque control (DTC) of an induction motor fed by a voltage source inverter is a simple scheme that does not need long computation time. The main advantage of DTC technique is that it is not sensitive to the variation of motor parameters except the stator resistance in its flux observer especially at low speed operation. The stator resistance can be changes during the motor operation due to ambient temperature or frequency. This paper, introduces an additional on Line fuzzy controller used to estimate the stator resistance for the DTC flux observer. The inputs for the proposed fuzzy controller are speed and stator current errors between the traditional DTC flux observer values, which using constant value of the stator resistance equals to the nominal value, and their values using the proposed on line stator resistance estimator values. The induction motor saturated pi model is used which is more practical than the approximate linear model especially in the large motors. The saturation function and the motor parameters are identified experimentally. The proposed technique response is checked at sinusoidal and trapezoidal reference speeds. The results show good improvements of the DTC response using the proposed adaptive fuzzy controller during on line variation in the stator resistance of the induction motor | ||||
| Keywords | ||||
| adaptive control; Fuzzy controller; DTC drives; Induction machines; Parameter estimation | ||||
|
Statistics Article View: 126 PDF Download: 229 |
||||
