Creep behavior of β Cu-Zn Alloys | ||||
| Arab Journal of Nuclear Sciences and Applications | ||||
| Article 15, Volume 51, Issue 2, April 2018, Page 124-136 PDF (1.8 MB) | ||||
| Document Type: Original Article | ||||
| DOI: 10.21608/ajnsa.2017.1945.1007 | ||||
 View on SCiNiTO | ||||
| Author | ||||
Adel Zaki Mohamed 
| ||||
| Solid physics, Zagazig University | ||||
| Abstract | ||||
| Creep Behavior Abstract: Transient creep tests are performed under constant stress conditions at temperatures ranging from 533 to 653˚ K for Cu-38wt%Zn, and Cu-38wt%Zn-2wt% Pb samples. The transient creep is described by _tr= βt^n, where _tr and t are the transient creep strain and time. However, the parameters n, β are calculated, and the activation energy of the transient creep shows for both alloy two regions at low and high temperatures. Also, the activation energy were determined to clarify the controlling mechanism. At low temperature rang (240-360˚C), the strain rate sensitivity parameter m has values (0.247-0.174) while its values at high temperatures ranging from (0.192 up to 0.263) at 653˚K. These values give an indication that dislocation glide is probably an operating mechanism is grain boundary diffusion. Also, the change of microstructure was studied, grain size, microhardness, and stress-strain behavior has been studied too. Keywords: Transient creep, Cu-Zn-Pb, lattice-diffusion, dislocations. | ||||
| Keywords | ||||
| Keywords: Transient creep; Cu-Zn-Pb; lattice-diffusion; dislocations | ||||
|
Statistics Article View: 423 PDF Download: 476 |
||||
