Design and Implementation of CubeSat Ground Station Subsystem

Abdelhady, Ahmed; Elsayed, Mohammed; Abdelnaser, Mohammed; Karam, Bishoy; Soleit, Elsayed; Tarrad, Ibrahim F.; Elsayed, Saad

doi:10.21608/iugrc.2017.90647

	Design and Implementation of CubeSat Ground Station Subsystem
The International Undergraduate Research Conference
Article 28, Volume 2, Second International Undergraduate Research Conference, IUGRC, 2017, Page 107-107 PDF (517.06 K)
Document Type: Original Article
DOI: 10.21608/iugrc.2017.90647
View on SCiNiTO
Authors
Ahmed Abdelhady¹; Mohammed Elsayed¹; Mohammed Abdelnaser¹; Bishoy Karam¹; Elsayed Soleit²; Ibrahim F. Tarrad³; Saad Elsayed⁴
¹Electronics and Communication Department, High Institute for Engineering and Technology, AL-Obour, Egypt.
²Prof. Dr. Eng., Electronics and Communication Department, High Institute for Engineering and Technology, AL-Obour, Egypt.
³Associated Professor, Electronics and Communication Department, Faculty of Engineering, Al-Azhar University, Egypt.
⁴Assistant Lecturer, Electronics and Communication Department, High Institute for Engineering and Technology, AL-Obour, Egypt.
Abstract
The purpose of this project is to demonstrate CubeSat Ground Station. The Ground Station is responsible for sending commands ( Voice or image ) to the satellite and receiving all data from satellite (Telemetry information) then analysis all data received to insure the data are received corrected and take the corresponding action according to the analysis. A simulation analysis is carried out for the analysis by Arduino Mega 2560 and C + program. The analysis carried for received and transmitted image from ground station to CubeSat and telemetry. Also analysis carried out for check the data by cyclic redundancy code. The results show that it’s extremely data verification.


Statistics Article View: 183 PDF Download: 88