DESIGN CONSIDERATIONS OF A COMBINATION MACHINE FOR CHOPPING AND MILLING ARUNDO DONAX (PART I) | ||||
| Misr Journal of Agricultural Engineering | ||||
| Article 8, Volume 31, Issue 2, April 2014, Page 467-490 PDF (1.5 MB) | ||||
| Document Type: Original Article | ||||
| DOI: 10.21608/mjae.2014.99591 | ||||
 View on SCiNiTO | ||||
| Authors | ||||
| M. M. Badr1; M. M. A. El-Sharabasy2 | ||||
| 1Lecturer of Agric. Eng., Fac. of Agric., Zagazig Univ., Egypt. | ||||
| 2Assist. Prof. of Agric. Eng., Fac. of Agric., Zagazig Univ., Egypt. | ||||
| Abstract | ||||
| The aim of present work was to carry out theoretical analysis to design to design a combination machine to be suitable for chopping and milling Arundo donax plants and then to use the design considerations afterward to manufacture and evaluate the performance of the combination machine to reach up the optimum operating parameters. The design considerations included estimation of the following parameters: number of knives on the cutter-head, cutter-head speed, feed rolls speed and Arundo donax density in the feeding throat. The design considerations were evaluated taking into consideration the following indicators: theoretical cut length, theoretical capacity and required total power; furthermore determination of cutter-head shaft diameter as well as hammer mill shaft diameter. The design results reveal that the highest values of theoretical cut length and theoretical capacity were (29.14 mm and 756 kg/h) respectively, while the lowest values of chopping and milling units power were (9.54 and 20.17 kW), respectively and the values of cutter-head shaft diameter and hammer mill shaft diameter were (50 and 60 mm), respectively under the following conditions: number of knives on the cutter-head of 2 knife, cutter-head speed of maximum 1400 rpm and Arundo donax density in the feeding throat of 6.18 kg/m3 with adjusting feed rolls speed of 1.36 m/s. | ||||
| References | ||||
|
Angelini, L.G; L. Ceccarinia, and E. Bonarib (2005): European Journal of Agronomy, 22, 2005, pp 375-389
Bell, G. P. (1993): Prado Basin resource management plan for the control of Giant Reed (Arundo donax). The Nature Conservancy.
Forest, S; S. Kim and L. Loope (2003): United States Geological Survey-Biological Resources Division Haleakala Field Station, Maui, Hawai' I, January, 2003.
Heaton, E; T. Voigt and S. P. Long (2004): A quantitative review comparing the yields of two candidate C4 perennial biomass crops in relation to nitrogen, temperature and water. Biomass and Bioenergy. 27:21–30.
Hoque M; S. Sokhansanj, L. Naimi, X. Bi and J. Lim (2007): Review and analysis of performance and productivity of size reduction equipment for fibrous materials. ASABE paper no: 076164 St. Joseph, Mich., pp2-6. Hoshovsky, Marc (2003): ELEMENT STEWARDSHIP ABSTRACT for Arundo donax (Giant Reed). THE NATURE CONSERVANCY. 1815 North Lynn Street, Arlington, Virginia 22209 (703) 841 5300.
Khurmi, R. S. and J. K. Gupta (2005): A textbook of machine design. Eurasia Publishing House (Pvt) LTD. RAM Nagar, New Delhi. 110055.
Lowe, S. J; M. Browne and S. Boudjelas (2000): 100 of the World's Worst Invasive Alien Species, Published by the IUCN/SSC Invasive Species Specialist Group (ISSG), Auckland, New Zealand. http://www.issg.org/worst100_species.html.
Moiceanu, G; V. Gheorghe, G. Paraschiv, C. P. Ion and P. Maican (2012): Physical characteristics of miscanthus plant and power demand at grinding process. Engineering for Rural Development Jelgava 24, pp222. Srivastava, A. K; C. E. Goering and R. P. Rohrback (1993): Engineering principles of agricultural machines. Transaction of ASAE Textbook. No 6. St. Joseph, MI, 1993. | ||||
|
Statistics Article View: 245 PDF Download: 276 |
||||
