EKB Journal Management System

1.

Guar Gum-Neem Gum Antimicrobial Biofilms for Preservation of Biological Samples

Articles in Press, Accepted Manuscript , Available Online from 18 August 2025
Ahmed E. Elhassany; Iman A. Gadelkarim; Mohamed S. Behalo; Manar El-Sayed Abdel-Raouf; Mohamed Keshawy

2.

The Evaluation of The Effect of Agarose-Based Cleaning Systems on Cotton Fabrics

Articles in Press, Accepted Manuscript , Available Online from 21 August 2025
rasha sadek; Mahmoud Morsy; Sawsan ..... Darwish; Omar Abdelkarim

3.

Enhancement of Fire Resistance in Cotton/Polyester and Cotton/Linen Blends Using Sol-Gel Derived Silicate/Phosphate Coatings

Articles in Press, Accepted Manuscript , Available Online from 16 September 2025
G. Zh. Jamanbayeva; B. R. Taussarova; А. Burkitbay; Negim El-Sayed; Ahmed G. Hassabo

4.

Effect of heating rate and sintering temperature on mechanical properties of zirconia partially toughened alumina

Articles in Press, Accepted Manuscript , Available Online from 05 October 2025
Ehab Mohamed Abdelbary; Tarek Mohamed Abd Elbadia; Mohamed Awaad; Salma Mohamed Naga

5.

Comparative Analysis of MIG and TIG Welding on AA7075-T6 Aluminum Alloy: Microstructure, Mechanical Properties, and Corrosion Behavior

Articles in Press, Accepted Manuscript , Available Online from 31 October 2025
Hossam Hemdan El-Fahhar; Elshafey Ahmed Gadallah; Adel Ibrahim Gelany; Ahmed E El Nikhaily; Abdelkarim Yousif Moahmed

6.

Production of lightweight bricks using sustainable materials for saving energy in building constructions

Articles in Press, Accepted Manuscript , Available Online from 04 November 2025
Bassam Abdelsalam Abdelsalam; Abdullah Khaled Lotfi; Ahmed  Bahaa Ahmed  Ahmed; Maher Mohamed Mahran Mahran; Mennatallah Muhammed Ali; Samar Mohamed Ahmed; Ahmed Ragab Saeid; Sohaila Salah Mohamed; Omar Mahmoud Osman

7.

Effect of Printing Parameters on Mechanical Strength and Surface Roughness of Material Extrusion-Printed PLA Fabricated Using a Customized 3D Printer

Articles in Press, Accepted Manuscript , Available Online from 05 November 2025
Mahmoud Heshmat; Mostafa Elshahed; Yasser Abdelrhman; Shemy M. Ahmed

8.

Effect of gamma radiation on conductivity and mechanical properties of Copper Wire

Articles in Press, Accepted Manuscript , Available Online from 09 November 2025
Eltohamy R. Elsharkawy; Walaa abd-Elmonem El-Kattan

9.

Effect of Micro- and Nano-Zeolite/Silica Fume on the Mechanical and Durability Characteristics of Reactive Powder Concrete

Volume 54, Issue 3, May and June 2026
Mohammed Arab; Al- Esraa Aboud; Magdy El-Yamany

10.

Comprehensive Review on Mechanical Properties and Optimization of Machining Parameters of Nanoclay-Filled Glass-Reinforced Plastic Composites

Volume 54, Issue 3, May and June 2026
Umeshchandra Jaisingh Jadhao; NITIN AMBHORE

11.

Effects of Rotational Speed on Microstructure and Mechanical Properties of Friction Stir Spot-Welded AA6082-T6/AA1050 Dissimilar Lap Joints

Volume 54, Issue 2, March and April 2026
abdelkarim Moahmed; Elshafey Ahmed Gadallah; Medhat Elwan; Mohamed M. El-Sayed Seleman; yousef Gamal Elshaghoul; Hossam Hemdan El-Fahhar

12.

Comparative Analysis of Flux-Cored Arc Welding and Shielded Metal Arc Welding Processes on Hardox 450 Steel: Microstructural, Mechanical, and Fractographic Investigation

Volume 54, Issue 1, January 2026, Pages 1-12
Mohamed Terra; Mohamed M. El-Sayed Seleman; Mohamed Ibrahim A. A. Habba

13.

Experimental Investigation on the Mechanical Behavior of Rubberized Concrete Incorporating Waste Tire Rubber

Volume 1, Issue 2, December 2025, Pages 17-30
Khaled Samy; Ahmed M. Gomaa; Kamal Hafez; Marwan M. Fathy; Abdelrahman M. shaaban; Fares W. Abdelwarth; Ahmed k. Salem; Omar M. Abdelkader

14.

Mechanical Properties of Self-Compacted Lightweight Concrete Using LECA with Various Mineral Additives.

Volume 68, Issue 13, December 2025, Pages 323-338
Mohamed Abouelhassan; Kamha M. G.; mohamed Ashraf; Bashandy A. A.

15.

Eco-friendly High-Density Polyethylene Nanocomposites Reinforced with Rice Straw-Derived Nanocellulose: Synthesis, Characterization, and Biodegradability Assessment

Volume 68, Issue 13, December 2025, Pages 1009-1031
Ghada A kadry; Heba A. El- Gawad; Mostafa H Hussein

16.

Thermo-Mechanical Properties Evaluation of Fiber-Reinforced Rubberized Concrete Mixes for Airfield Pavements

Volume 53, Issue 6, November and December 2025, Pages 232-247
Zainab Abd Elshafy; Mohamed Mohamed; Ghada Moussa; Mahmoud Enieb; Elsayed Abdallah

17.

Effect of SiC Content and Hot Compaction on the Microstructure, Thermal, Mechanical, and Tribological Characteristics of Aluminum Matrix Nanocomposites Produced via Powder Metallurgy

Volume 53, Issue 6, November and December 2025, Pages 211-236
ahmed M Elmashad; A. El-Sayed M. Hassan; Mohamed N. El-Sheikh; Moustafa M. Mohammed; Mohamed Okail; Osama Irfan; A. M.I. Abu-Oqail

18.

Characterization of Geopolymer Concrete Incorporating GGBFS and FA as Binding Materials

Volume 2, Issue 2, November 2025, Pages 1-28
Karim Mohsen; Khalid M. Morsy; Ibrahim A. Yousif; Ehab F. Sadek

19.

Investigation of Ballistic Impact Behaviour of SiC/ZTA Nano- Ceramics Backed by A UHMWPE Plate: Numerical Simulation and Experimental Validation

Volume 22, Issue 22, October 2025, Pages 1-13
A I Fayed; M Elgamhoudy; S M Naga

20.

Enhancing Mechanical Properties of PETG by Optimization of Process Parameters Using the Taguchi Method

Volume 22, Issue 22, October 2025, Pages 1-11
Ahmed H. Awad; Rehab Alaa Eldin Sayed; Mohamed Atef

21.

Impact of Species Differences on Cotton Fiber Characteristics and Dye-ability

Volume 68, Issue 10, October 2025, Pages 451-465
Waleed M. B. Yehia; Hanaa Ahmed Saad Zaghlol; Shereen Omar Bahlool

22.

Abrasive water jet machining of fiber reinforced polymer composite materials: A review

Volume 9, Issue 2, September 2025, Pages 79-86
Mohamed Salah Abohaggie; Ahmed S Mesalamy; Yasser M Elsherbini; Ahmed Elsabbagh

23.

تصميم وإنتاج أقمشة تقنية للحد من انتشار العدوي البكتيرية في معامل التفريخ ومزارع الدواجن

Volume 4, Issue 3, July 2025, Pages 7-28
أسامة محروس قبيصي; ياسمين عبد العزيز محمد أبو العمايم; محمد ابراهيم الصبري; محمد العيسوي

24.

ENHANCING CONCRETE PROPERTIES THROUGH USING NANO-CLAY AND NANO-SILICA IN CONCRETE MIX

Volume 20, Issue 76, July 2025, Pages 765-778
Ahmed Fawzi; Mahmoud Lasheen; Alaa Elkashif; Mohamed Gamil

25.

Effect of Modified Glass Ionomer With Moringa Nano-powder/Chitosan on Mechanical and Antibacterial Properties: An in vitro study.

Volume 71, Issue 3, July 2025, Pages 2385-2392
Huda Ahmed El Gendi; Ayman Sabbah; lamis Ahmed Hussein Enaba

First Page Previous Page 1 2 3 4 5 6 7 8 9 Next Page Last Page