DEVELOPMENT OF RICE MILLING MACHINE FOR DIFFERENT RICE VARIETIES TO IMPROVE PRODUCT QUALITY | ||||
| Misr Journal of Agricultural Engineering | ||||
| Article 3, Volume 30, Issue 3, July 2013, Page 599-626 PDF (652.35 K) | ||||
| Document Type: Original Article | ||||
| DOI: 10.21608/mjae.2013.100419 | ||||
 View on SCiNiTO | ||||
| Authors | ||||
| M. M. Morad1; M. M. Badr2; M. M. A. El-Sharabasy3; E. I. Abdel-Aal3 | ||||
| 1Professor of Agric. Eng., Fac. of Agric., Zagazig Univ., Egypt. | ||||
| 2Lecturer of Agric. Eng., Fac. of Agric., Zagazig Univ., Egypt. | ||||
| 3Assoc. Prof. of Agric. Eng., Fac. of Agric., Zagazig Univ., Egypt. | ||||
| Abstract | ||||
| The present research was carried out to develop and estimate some operating parameters and affecting the performance of a rice milling machine to improve product quality. The rice milling machine was developed by adding two units: cleaning unit to remove chaff and other foreign materials from rice grains before the milling operation and feed unit to adjust rice feed rate. The performance of the developed milling machine was studied under the following parameters: feed rate, drum speed, and grain moisture content in terms of overall machine efficiency, total grains losses, machine productivity, required power, specific energy and criterion cost. The experimental results reveal that the highest values of machine productivity and overall machine efficiency were 1.08, 1.17 and 1.35 Mg/h; and 95.00, 95.38 and 95.66 % for Sakha-101, Giza-171 and Sakha-105 varieties, respectively, while the lowest values of required power and specific energy were 13.0, 13.4 and 13.8 kW; and 17.40, 15.68 and 13.85 kW.h/Mg, respectively, for the same rice varieties, furthermore the lowest values of both operational and criterion costs were 8.53, 7.87 and 6.82 L.E./Mg; and 35.96, 31.96 and 29.38 L.E./Mg, respectively, for the same rice varieties. Results of mechanical analysis of the manufactured cleaning and feeding units reveal to the following: Sieve speed, sieve tilt angle and cleaning air velocity of about 400 rpm, 4.0 deg and 6.5 m/s. Mechanical feeding rate of 1.4 Mg/h for Sakha-101 variety and 1.6 Mg/h for both Giza-171 and Sakha-105 varieties. From the experimented results, it could be concluded that the optimum operating parameters for the developed milling machine were found at: Drum speed of about 800 rpm for Sakha-101 and 850 rpm for both Giza-171 and Sakha-105 varieties. Grain moisture content of about 14 % for Sakha-101 and 15 % for both Giza-171 and Sakha-105 varieties. | ||||
| References | ||||
|
Appiah, F; R. Guisse and P. K. A. Dartey (2011): Post harvest losses of rice from harvesting to milling in Ghana. Journal of Stored Products and Postharvest Research, 2 (4): 64-71.
Awady, M. N. (1978): Tractor and farm machinery. Text book, Faculty of Agriculture, Ain-Shams University. Pp: 164-167.
Awady, M. N; E. Y. Ghoniem, and A. I. Hashish (1982): Agriculture comparison between wheat combine harvesters under Egyptian conditions. Res. Bul. Ain-Shams Univ.:13p.
El-Raie, A. E. S; N. A. Hendawy and A.Z. Taib (1996). Study of physical and engineering properties for some agricultural products. Misr. J. Ag. Eng., 13 (1):211- 226.
Klenin, N. I; I. F. Popov and V.A. Sukun (1985). Agricultural machines. Theory of operation, computation of controlling parameters and the conditions of operation. Amerind publishing Co. PVT. Ltd., New Delhi.
Radwan, S. M. (2001): The potential energy consumption for milling some Egyptian rice varieties. Misr J. Ag. Eng., 18(3): 537-551.
Soltanabadi, M. H. and A. Hemmat (2007): Effect of blade distance and output rate on rice quality in a modified blade-type milling machine. Journal of Science and Technology of Agriculture and Natural Resources, 11 (1 A): 135-146.
Varnamkhasti, M. G; H. Mobli, A. Jafari, M. H. Soltanabadi, A. Keyhani and S. Kaffee (2007): Processing quality of milled rice in modified blade type milling machine considering variety type, rotor speed, and output flow rate. Proceedings of the International Agricultural Engineering Conference, Bangkok, Thailand, 3-6 December. | ||||
|
Statistics Article View: 310 PDF Download: 277 |
||||
