High Voltage Cross-Linked Polyethylene Insulator Characteristics Improvement Using Functionalized ZnO Nanoparticles
eldesoky, E., said, A., Nawar, A., Abdallah, M., Kamel, S. (2020). High Voltage Cross-Linked Polyethylene Insulator Characteristics Improvement Using Functionalized ZnO Nanoparticles. EKB Journal Management System, 63(12), 4929-4939. doi: 10.21608/ejchem.2020.31244.2664
Elsayied eldesoky; Abdelrahman said; Amira Nawar; Mousa Abdallah; Samir Kamel. "High Voltage Cross-Linked Polyethylene Insulator Characteristics Improvement Using Functionalized ZnO Nanoparticles". EKB Journal Management System, 63, 12, 2020, 4929-4939. doi: 10.21608/ejchem.2020.31244.2664
eldesoky, E., said, A., Nawar, A., Abdallah, M., Kamel, S. (2020). 'High Voltage Cross-Linked Polyethylene Insulator Characteristics Improvement Using Functionalized ZnO Nanoparticles', EKB Journal Management System, 63(12), pp. 4929-4939. doi: 10.21608/ejchem.2020.31244.2664
eldesoky, E., said, A., Nawar, A., Abdallah, M., Kamel, S. High Voltage Cross-Linked Polyethylene Insulator Characteristics Improvement Using Functionalized ZnO Nanoparticles. EKB Journal Management System, 2020; 63(12): 4929-4939. doi: 10.21608/ejchem.2020.31244.2664

High Voltage Cross-Linked Polyethylene Insulator Characteristics Improvement Using Functionalized ZnO Nanoparticles

Egyptian Journal of Chemistry
Article 24, Volume 63, Issue 12, December 2020, Page 4929-4939  XML PDF (1.58 MB)
Document Type: Original Article
DOI: 10.21608/ejchem.2020.31244.2664
View on SCiNiTO View on SCiNiTO
Authors
Elsayied eldesoky1; Abdelrahman said2; Amira Nawar email orcid 3; Mousa Abdallah2; Samir Kamel4
1Polymer and Pigment Department, National Research Centre, 33 El-Bohouth St. Dokki, Giza, 12622, Egypt
2Electrical Engineering Department, Faculty of Engineering at shoubra, Benha University
3Higher Institute for Engineering and Modern Technology, Marg, Cairo, Egypt
4Cellulose and Paper Department, National Research Centre, 33 El-Bohouth St. Dokki, Giza, 12622, Egypt
Abstract
This study aims to develop large-scale commercial Cross-Linked Polyethylene (XLPE) nanocomposites used for industrial applications with power cables insulations. To achieve this goal, XLPE/zinc oxide nanocomposites were prepared with four unique loadings of Zinc Oxid (ZnO) nanoparticles: 0.5, 2, 3.5 and 5 wt.%, in the presence of appropriate coupling agent which used to reduce the agglomeration of nanoparticles and to improve the compatibility inside the polymer matrix. Amino silane was the coupling agent used in this study and the nanocomposites preparation was done using the melt blending method. The morphology and the distribution of nanoparticles inside XLPE polymer were studied using Field Emission Scanning Electron Microscopy (FE-SEM). The mechanical properties were also evaluated. Using Differential Scanning Calorimetry (DSC) and Thermo Gravimetric Analysis (TGA), the thermal properties for nanocomposites were investigated. The dielectric properties of these prepared XLPE/ZnO nanocomposites were studied by measuring the loss tangent (tan δ) and the dielectric constant (ɛr) under frequencies ranging from 1 Hz to 1 MHz. The AC Breakdown Voltage (AC-BDV) was also measured using a controlled high voltage testing transformer (50 Hz) under the sphere-to-sphere field then; the AC dielectric strength was calculated using the Finite Element Method (FEM) technique.
Keywords
XLPE; Nanocomposites; Zinc oxide nanoparticles; Electrical; Thermal; and Mechanical properties
Statistics
Article View: 627
PDF Download: 1,468