MANUFACTURE AND PERFORMANCE EVALUATION OF A LOCAL THRESHING AND CLEANING MACHINE SUITS MEDICINAL AND AROMATIC PLANTS | ||||
| Misr Journal of Agricultural Engineering | ||||
| Article 4, Volume 29, Issue 3, July 2012, Page 927-950 PDF (804.76 K) | ||||
| Document Type: Original Article | ||||
| DOI: 10.21608/mjae.2020.101797 | ||||
 View on SCiNiTO | ||||
| Author | ||||
| M. M. Badr | ||||
| Lecturer of Agric. Eng., Fac. of Agric., Zagazig Univ. Egypt. | ||||
| Abstract | ||||
| Experiments were carried out to manufacture and evaluate the performance of a threshing and cleaning machine suitable for medicinal and aromatic plants (Anise, Fennel and coriander crops). The performance of the manufactured machine was studied under the following parameters: four different drum speeds, four different concave clearances and four different feed rates. The performance of the manufactured machine was evaluated taking into consideration the following indicators: total seed losses, overall machine efficiency, machine productivity, required power, energy requirements and criterion cost. The experimental results reveal that total seed losses as well as criterion costs were minimum while overall machine efficiency was maximum under the following conditions: • Operate the manufactured machine at a drum speed of about 450 rpm for anise and fennel crops, and 400 rpm for coriander crop. • Operate the manufactured machine at a concave clearance of about 9 mm for anise and fennel crops, and 10 mm for coriander crop. • Adjust the feed rates at 1.25, 1.35 and 1.50 Mg/h for anise, fennel and coriander crops respectively. | ||||
| References | ||||
|
Afify, M. K; M. M. A. El-Sharabasy and M. M. A. Ali (2007): development of a local threshing machine suits for threshing black seed (Nigella sativa). Misr J. Ag. Eng., 24 (4):699 – 724.
Awady, M. N; E. Y. Ghoniem, and A. I. Hashish (1982): Agriculture comparison between wheat combine harvesters under Egyptian conditions. Res. Bul. Ain-Shams Univ.:13p.
Badawy, M. E. (2002): Modification and evaluation of paddy rice thresher to suit flax deseeding . Misr J. Ag. Eng., 19 (4): 881–900.
Badr M. M; M. A. Hassan, M. M. Morad and M. A. Arnaout (2009): Engineering parameters required for the design and development of cleaning machine for medicinal and aromatic seed crops. Ph.D. Thesis Agric. Eng. Dep., Fac. of Agric. Zagazig Univ.
Ebaid, M. T; A. A. Abd El-Rahman, G. G. Radwan and H. E. Osman (2004): Development of a thresher for wheat of beater type for maximum productivity. Misr J. Ag. Eng. , 21 (1):14 – 28.
El-Hadad, W. Z. (2000): A simplified design and performance study of threshing and winnowing machine suitable for small holdings. M. Sc. Thesis. Agric. Mech., Fac. Of Agric., Kafr El-Sheikh, Tanta Univ.
El-Nono, M. A. and A. H. A. Mohammed (2000): A study on power requirements for wheat threshing. Egypt. J. Agric. Res. 78(5): 2169-2176.
El-Sahrigi, A. F. M; S. F. Ahmed, M. A. Helmy, H. M. Sorour and S. S. Hanna (2004): Construction and development of a cleaning unit suitable for medicinal and aromatic seed crops. Misr J. Ag. Eng., 21(4): 53 – 66.
Mamdouh A. H; S. I. Yousef and A. M. Badawy (2000): Performance evaluation of some sunflower thresher. Egyptian Journal of Agricultural Research, 78(2): 969 – 973.
Simonyan K. J. and K. C. Oni (2001): Performance evaluation of a motorized locust bean decorticator. Journal of Agricultural Technology 9(1): 55 - 65.
Zakaria, M. I. (2006): Modification of the thresher drum of stationary thresher to suit separating of flax crop. Misr J. Ag. Eng., 23(2): 324-345.
Zaky, W. M. (2006): Engineering studies on threshing of black seed (Nigella Sativa). M. Sc. Thesis. Agric. Eng. Dep., Fac. of Agric., Mansoura Univ. | ||||
|
Statistics Article View: 136 PDF Download: 223 |
||||
