BASIC DESIGN CRITERIA OF EXPELLING MACHINE FOR EXTRACTING WHEAT GERM OIL | ||||
| Misr Journal of Agricultural Engineering | ||||
| Article 18, Volume 29, Issue 2, April 2012, Page 799-816 PDF (908.24 K) | ||||
| Document Type: Original Article | ||||
| DOI: 10.21608/mjae.2012.102350 | ||||
 View on SCiNiTO | ||||
| Authors | ||||
| M.A. El-Nono1; A.M. Abdel-Gawad2 | ||||
| 1Agric. Eng. Dep., Fac. of Agric., Ain Shams Univ., Cairo, Egypt. | ||||
| 2Agric., Eng. Res. Inst. (AEnRI), Dokki- Giza, Egypt. | ||||
| Abstract | ||||
| An expelling machine for extracting wheat germ oil was designed and fabricated. The study included the investigation of the design criteria relating to hopper dimension and screw shaft parameters (outer diameter, pitch, thread depth, thread width, thread length, lead, lead angle, tapered angle, and number of turns on the screw shaft). The expelling machine was tested and evaluated at five screw speeds (25, 35, 45, 55, and 65 rpm) and four levels of press head clearance (0.5, 1, 1.5, and 2 mm) to determine the best machine capacity; percentage of oil recovery; percentage of residual oil; and specific energy consumption. The results showed that, the maximum machine capacity was 39 kg/h of raw material at 2mm outlet clearances, and 65 rpm of screw speed. The best operating pressing conditions for the wheat germ oil recovery was 45.7% at the 25 rpm of screw speed and 0.5 mm press head clearance, when the required specific energy was 0.0232 kWh/kgfeed. | ||||
| References | ||||
|
Appelt, G. (1986). Nutritional value and stability of extruded wheat germ product, Getreide Mehl Brot 40:176–180.
AOCS, (1996). The Official and Tentative Methods of the American Oil Chemist's Society, 3rd Ed. American Oil Chemist's Society, 508 South Sixth Street, Champaign, Illinois.
Bass, E.J. (1988). Wheat flour milling, in Wheat: Chemistry and Technology, edited by Y. Pomeranz, American Association of Cereal Chemists, St. Paul, , Vol. 2, pp. 1–56.
Beerens, P. (2007). Screw-pressing of Jatropha seeds for fuelling purposes in less developed countries. M.Sc. Thesis, Department of Sustainable Energy Technology, Eindhoven University of Technology, Eindhoven, p. 87.
Bredeson, D. K. (1983). Mechanical extraction. Journal of American Oil Chemists Society, 60(2), 211–213.
Chancellor, W. J. (1981). Substituting information for energy in agricultural. Trans. ASAE, Paper No. 0001- 2351.
Chakraverty, A. (1987). Post harvest technology of cereals, pulses and oil seeds (Revised Edition). Oxford and IBH Publishing Co. PVT LTD. New Delhi. Bombay, Calcutta.
Dhale A.D. and J.P. Modak (2011). Design and development of oil seed presser by using energy source as human powered flywheel motor. International Journal of Agriculture and Food Science Technology. Vol. 2, No. 1, pp. 63-72.
Dunford, N. T. (2005). Germ oils from different sources. In: Bailey’s Industrial Oil and Fat Products, 6th Ed. Editor: F. Shahidi. John Wiley and Sons, N.J. Vol. 3, “Edible Oil and Fat Products: Specialty Oils and Oil Products”, Ch. 8, pp. 195-231.
FAO, (2010). Production year book, for 2009. Food and Agriculture Organization of the United National. Rom.http://www.fao.org/corp/statistics/en/
Ibrahim, M. K. E. (1982). Wet Milling Wheat Grain. Master thesis of science. Fac. of Agric. Mansoura Univ., 64-65.
Harris, J. W. and H. Stocker (1998). "Frustum of a Right Circular Cone." in Handbook of Mathematics and Computational Science. New York: Springer-Verlag, p. 105. Horrobin, D. and M. Manku (1983). How do polyunsaturated fatty acids lower plasma cholesterol levels? Lipids 18:558–562. Khan, L. M. and M. A. Hanna (1983). Expression of oil from oil seeds. A review. J. Agric. Eng. Res., 28(6), 495-503.
Kahlon, T.S. (1989). Nutritional implications and uses of wheat and oat kernel oil, Cereal Foods World 34:872–875.
Oyinlola A. and L.O. Adekoya (2004). Development of a laboratory model screw press for peanut oil expression. J. Food Eng., 64: 221-227.
Sabelli A. M. (2004). Design of a Press for Oil Extraction from Moringa Seeds for Haiti. Bachelor thesis of science, Department of Mechanical Engineering, Massachusetts Institute of Technology. Haiti.
Saito, M., and Y. Yamanchi (1990). Isolation of tocopherols from wheat germ oil by recycles semi preparative supercritical fluid chromatography, J. Chromatogr. Sci. 505:257–271.
Sari, P. (2006). Preliminary Design and Construction of a Prototype Canola Seed Oil Extraction Machine. Master thesis of science. Department of Mechanical Engineering, Middle East Technical Univ., Ankara, Turkey.
Singh, L. and W.K. Rice (1979). Method for producing wheat germ lipid product, U.S. Patent 4,298,622.
Spotts, M. F. (1971). Design of machine elements (4th ed.). Englewood Cliffs, NJ: Prentice Hall Inc.
Tong, W. and A.J. Lawrence (2001). Refining high-free fatty acid wheat germ oil. J. Am Oil Chem. Soc. 78:71-76. | ||||
|
Statistics Article View: 131 PDF Download: 650 |
||||
