DEVELOPMENT OF A GRANULAR PROCESSING MACHINE | ||||
Misr Journal of Agricultural Engineering | ||||
Article 1, Volume 29, Issue 1, January 2012, Page 1-22 PDF (911.62 K) | ||||
Document Type: Original Article | ||||
DOI: 10.21608/mjae.2012.102363 | ||||
View on SCiNiTO | ||||
Authors | ||||
Samir Tayel1; Abd El-Kader El-Nakib1; I. Yehia,2; M. A. EL-ESAILY,3 | ||||
1Prof. of Ag. Eng. Dept., Faculty of Ag., Al-Azhar University, Egypt. | ||||
2Chief Res., Ag.. Eng. Res. Inst. , Egypt. | ||||
3Ass. Res., Ag.. Eng. Res. Inst. , Egypt. | ||||
Abstract | ||||
The aim of this study was to develop and testing of granular-processing machine for poultry fodder. The tested parameters were: (1) die speeds of 160, 180, 200, 220, 240 and 260 rpm, the die speeds were 80, 90, 100, 110, 120 and 130 rpm (2) hole diameters of 3, 4 and 5 mm (3) Die thickness of 8, 12, 15, 20 and 25 mm. and (4) Moisture content of fodder mixture 5 %, 10% and 15%. The optimum conditions of developed machine were: (1) Die-hole diameter of 3, 4 and 5 mm, (2) Die thickness of 8 mm, (3) Die speed of 220 rpm, (4) Fodder moisture-content of 10 % and (4) Granular dry-duration of 69 h. The obtained results in optimum conditions can be summarized as follows: Granular productivity ranged between 185 – 276 kg/h, Granular losses ranged between 3.03 – 3.78 %, real density ranged between 1.1469 – 1.1491 g / cm3, Granular durability ranged between 88.9 – 90.7 and Machine power ranged between 8.89 – 10.05 kW. The variables affecting the granular productivity, total losses, density were combined into dimensionless groups. The general equations were formulated inside the paper. The production costs at optimum conditions were 12 to 11.71 64.84, 54.17 and 43.84 L.E./ton for die-hole diameters 3 and 4 and 5 mm respectively. | ||||
References | ||||
ASAE Standards, 1996. Cubes, pellets, and crumbles definitions and methods for determining density, durability, and moisture content: 477-479, 499. Awady, M. N., 1978, Engineering of tractors and agricultural machinery, Text Bk., col. Ag., Ain-shams U., 5 th. Ed. : 164-167. ( In Arabic. ) ( Updating 1998 ).
Awady, M.N., 1989, Appropriate agricultural mechanization in ARE, Egyptian-German Ag. Mec. Conf., Mansura U.: 11-22. Awady, M. N., 1995, Computer and data analysis, Text memos, Col. Ag., Ain Shams U.: 30 – 35.
Culpin, C., 1986, Farm machinery, 11th ed. Granada Pub. Ltd. London ELBS Collins: 276 - 285.El-Derey, A. A., 2005, Studies on poultry husbandry and nutrition, Ph. D., Animal Production Dept., Mansoura U.: 1-2.El Attar, A. A., 2010, Design and testing of a pelleting machine for recycling agricultural residues of animal feed, Ph. D., Inst. Environ. Studies and Res., Ain Shams U.: 42-57.
Ibrahim, M. K., 1982, Wet milling grain, M. Sc. Th., Fac. of Ag., Mansoura U.: 61-64.
Khurmi, R. S., 1978, A text book of hydraulics and fluid mechanics, Chand and Co. LTD, New Delhi: 787 – 807. | ||||
Statistics Article View: 110 PDF Download: 141 |
||||