FABRICATION AND EVALUATION EXTRACTION UNIT FOR GINNING EGYPTIAN COTTON | ||||
| Misr Journal of Agricultural Engineering | ||||
| Article 4, Volume 29, Issue 1, January 2012, Page 61-80 PDF (624.13 K) | ||||
| Document Type: Original Article | ||||
| DOI: 10.21608/mjae.2012.102555 | ||||
 View on SCiNiTO | ||||
| Authors | ||||
| Sh. Abd El-Hameed; A.E. Elyamani; S. E. Bader | ||||
| Agric. Eng. Res. Institute,Agric. Res. Center, Dokki, Giza, Egypt. | ||||
| Abstract | ||||
| This research aims to develop and evaluate small prototype machine performance during gin Egyptian cotton in laboratory. This machine helped technicians scholars to study the effect of ginning experimental parameters on fiber cotton quality properties. The independent variables in this study were: four rotation speeds were 0.79 m/s (60 r.p.m) ,1.18 m/s (90 r.p.m), 1.60 m/s(120 r.p.m) , and 2.36 m/s(180 r.p.m), three feeding rates were 30 kg/h, 45 kg/h and 60 kg/h and three values of clearance between two drums of 3 , 4 and 5 mm. Evaluation parameters were : gin stand productivity, lint turn out, seed wastage mass, gin lint losses and ginning efficiency. Also, energy requirement and total cost production were determined. On other hand, a comparative study between development prototype gin machine and the conventional McCarthy gin roller made to evaluate fiber properties. The test results for developed gin stand performance found that, a maximum of ginning efficiency, gin stand capacity, lint turn out percentage were 81.28 %. 32.8 kg, and 43.1 %, respectively . also, maximum of seeds wastage mass was 17.49 kg/h. while, minimum of gin lint losses percentage was 3.5% and minimum of energy requirement was 154.26 kW.h/Mg. On other hand, minimum of total operation cost was 231.40 L.E/Mg while, minimum of criterion function cost was 364.10 L.E/Mg. consequently, the new developed prototype machine was influenced by all of independent variables. Recently, a comparative study between the developed gin stand and the conventional McCarthy gin roller on the fiber quality properties found that the gin stand developed was consider the best for ginning Egyptian seed cotton samples. | ||||
| Keywords | ||||
| Developed machine; gin; seeds; fibers | ||||
| References | ||||
|
ASTM,Standards(1982). Designatians:64,(884-96)ASTM, Philadelphia ,Pa, USA..
ASTM, Standards (1984). Designations: 1445 – 75. American society for testing and materials. Standards of textile testing and materials .The society, philadelaphia, USA.
Awady,M.N.1978. Tractors and farm machine, in Arabic, text. Col. Ag., Ain Shams Univ.; 164-167.
Anthony, W.S.1979. Energy-quality considerations in modeling cotton ginning systems. Trans. of The ASAE. 22(3): 644-648.
Anthony, W.S.1985. Effect of gin stands on cotton fiber and seed Cotton. Gin and Oil Mill Press.; 86(16): 14-18.
Anthony, W.S.1989. Performance characteristics of cotton ginning machinery . American Society of Agricultural Engineers.; Paper (89-1010): 26 pp.
Eweida, M.A.; G.A.Morshedi; M.A, Risk and S.S.Marzook (1984). Effect of the rotary knife gin –stand adjustment and cleaning the cotton lint on ginning efficiency in some Egyptian and upland cotton varieties. Agric.res.rev. 62(6): 301 –311.
Ezeike, M.S. 1987. Energy requirements for cotton gin machinery. Applied Engineering in Agriculture. 12(3): 455-473.
Gustafson, R.J. 1980. Fundamentals of Electricity for Agriculture. The AVI publishing company, Inc. Westport, Connecticut.
Hossam el-din, A.E. (1978) Ginning efficiency as affected by cotton characteristics and some other major factors. Ph.D thesis. Fac. of Agric. Al –azhar Univ.
Hughs, S.E.; M.N. Gillum and W.F. Lalor.1983 Fiber quality from a combination gin-lint cleaner. American Society of Agricultural Engineers. Paper No. ( 83-3533): 15 pp.
Matouk A. M. ; Y. M. El-Hadidi and H. El-Mashad.1999. Energy accounting and management in some food plants. Misr Journal of Agric. Eng. 16 (1) : 157-175.
Mangialardi, G.J. and W.S. Anthony 2000. Engineering and ginning: feasibility of applying seed cotton cleaning principles to lint cleaning. Journal of Cotton Science. 4(3): 183-192.
May, O.L.and B.C. Bridges, Tr. (1995). Breeding cottons for conve-ntional and late planted production systems. Crop Sci. 35: 132-136. Patil, P.G.;S.K. Shukla and V.G. Arude 2006. Design development and performance evaluation of portable cotton ginning machines. AMA, 37(1): 30-34.
Rafiq-Chaudhry, M. 1997. Harvesting and ginning of cotton in the world. Proceedings Beltwide Cotton Conferences, New Orleans, LA, USA, Volume 2 : 1617-1619.
Whitelock, D.P; C.B. Armijo; G.R.Gamble and S.E. Hughs 2007. Survey of seed-cotton and lint cleaning equipment in U.S. roller gins. USDA - ARS Southwestern Cotton Ginning Research Lab, 300 E College Journal of Cotton Science. 11(3): 128-140. | ||||
|
Statistics Article View: 152 PDF Download: 292 |
||||
