PHYSICAL AND MECHANICAL CHARACTERISTICS OF CORN KERNELS | ||||
| Misr Journal of Agricultural Engineering | ||||
| Article 13, Volume 28, Issue 4, October 2011, Page 961-974 PDF (495.54 K) | ||||
| Document Type: Original Article | ||||
| DOI: 10.21608/mjae.2011.102606 | ||||
 View on SCiNiTO | ||||
| Authors | ||||
| A. K. Daboul1; M. N. Awady2; M. A. Hamada3; M. Z. EL-Attar4 | ||||
| 1Assist. Lecturer ,Agr. Mech. Dept., Agr. College ., Basrah Univ. Basrah , Iraq. | ||||
| 2Prof. Emt. of Agr. Eng. Dept., Fac. Agri., Ain Shams Univ. Egypt. | ||||
| 3Assist. Prof. of Agronomy Dept., Fac. Agri,. Ain Shams Univ., Egypt. | ||||
| 4Lecturer of Agr. Eng. Dept., Fac. Agri., Ain Shams Univ. Egypt. | ||||
| Abstract | ||||
| The present study aimed to determine and recognize the physical ans mechanical properties as an important role in designing and developing of specific machines and their operations such as planting, harvesting and grading, Physical characteristics of corn kernels were obtained of two varieties: White Dent Corn single hybrid 10 (Corn 10), and yellow Dent Corn single hybrid 162,(Corn 162).For each of the physical characteristics, corn 10 gave the highest values comparing with corn 162. For each of the material surfaces, the galvanized surface gave the lowest static coefficient of friction (0.531 , 0.459)for corn 10 , corn 162 respectively; and for the same group, the plywood surface gave the highest value (0.624 , 0.586) for the two varieties respectively. For the painted surfaces, the oven - baked enamel processed paint gave the lowest values (0.48, 0.5) for the two varieties comparing with Polish paint, Mutt paint, and untreated mild - steel surfaces which gave (0.828, 0.72 – 0.72, 0.71 – 0.572, 0.549) respectively. | ||||
| References | ||||
|
Amin M.N., M.A. Hossain and K.C. Roy (2004). Effects of moisture content on some physical properties of lentil seeds. J.of Food Eng..65:83-87.
Baumler E., A. Cuniberti, S.M. Nolasco and I.C. Riceobene (2005). Moisture dependent physical and compression properties of Safflower seeds. Journal of Food Engineering, WWW.elsavier. com./located/J. Food Eng,1-7.
Boumans G. (1985). Grain handling and storage. Elsevier Sc. Pub. B. V. Amsterdam, Belgium.
Helmy M.A. (1995). Determination of static friction coefficient of some Egyptian agricultural products on various surfaces. Misr, J. Ag. Eng.12(1):267-282.
Kaleemullah, S.(1992).The effect on moisture content on the physical properties of groundnut kernels. Tropical Sc., 32, 129-136.
Karababa Ersan (2005). Physical properties of popcorn kernels. J. of Food Eng.WWW.elsevier. Com/locate/j food eng.1-8.
Lawton P.J. (1980). Coefficients of friction between cereal grain and various silo wall materials. J. agric. Eng.Res.25:75-86.
Mohsenin N.N.(1986). Physical properties of plant and animal materials New York: Gordon and Breach Sc. Publisher.
Nesvadba P., M. Houska, W. Wolf, V. Gekas, D. Jarvis, P.A. Saaad And A. I. Johns (2004). Database of physical properties of agro-Food materials, J. of Food Eng.61:497-503.
Ozarsland (2002). Physical properties of cotton seed. Biosys. Eng. 83:169-174.
SolimanN.S.(1994). Effect of moisture content on angle of repose of paddy rice and its products. Misr, J. Ag. Eng. 11(1):163-173.
SolimanN.S., M. A. Abd ElMaksoud, G. R. Gamea, and Y. A. Qaid, (2009). Physical characteristics of wheat grains. Misr, J. Ag. Eng. 26(4):1855-1877. | ||||
|
Statistics Article View: 170 PDF Download: 672 |
||||
