Cost Analysis of Using some Types of Polymers to Asphalt Concrete Mixtures.
Abd-Allah, A., Attia, M., Khamis, M., Deef-Allah, E. (2020). Cost Analysis of Using some Types of Polymers to Asphalt Concrete Mixtures.. EKB Journal Management System, 39(3), 33-46. doi: 10.21608/bfemu.2020.102686
Ahmed Mohamady Abd-Allah; Mohamed Ibrahim El-sharkawi Attia; Mahmoud Fathy Abd-Elmaksoud Khamis; Eslam Magdy Mohammed Deef-Allah. "Cost Analysis of Using some Types of Polymers to Asphalt Concrete Mixtures.". EKB Journal Management System, 39, 3, 2020, 33-46. doi: 10.21608/bfemu.2020.102686
Abd-Allah, A., Attia, M., Khamis, M., Deef-Allah, E. (2020). 'Cost Analysis of Using some Types of Polymers to Asphalt Concrete Mixtures.', EKB Journal Management System, 39(3), pp. 33-46. doi: 10.21608/bfemu.2020.102686
Abd-Allah, A., Attia, M., Khamis, M., Deef-Allah, E. Cost Analysis of Using some Types of Polymers to Asphalt Concrete Mixtures.. EKB Journal Management System, 2020; 39(3): 33-46. doi: 10.21608/bfemu.2020.102686

Cost Analysis of Using some Types of Polymers to Asphalt Concrete Mixtures.

MEJ- Mansoura Engineering Journal
Article 8, Volume 39, Issue 3, September 2014, Page 33-46  XML PDF (765.38 K)
Document Type: Research Studies
DOI: 10.21608/bfemu.2020.102686
View on SCiNiTO View on SCiNiTO
Authors
Ahmed Mohamady Abd-Allah1; Mohamed Ibrahim El-sharkawi Attia2; Mahmoud Fathy Abd-Elmaksoud Khamis2; Eslam Magdy Mohammed Deef-Allah* 3
1Assistant Professor , Public Works Engineering Department , Faculty of Engineering, Zagazig University
2Lecturer , Public Works Engineering Department , Faculty of Engineering, Zagazig University
3Graduate Research Assistant, Public Works Engineering Department , Faculty of Engineering, Zagazig University
Abstract
Attention has been increasing towards the use of polymer modified asphalt, because conventional asphalt mixtures cannot resist the high axle loads and tire pressures. The main objective of this research was to evaluate economic feasibility of adding several types of polymers on asphalt mixtures in Egypt. Study program involved four steps. The first step was presentations and discussions results of lab work. The second step was estimating the cost per one cubic meter of asphalt mixtures using four types of polymers. The third step was calculating pavement life of virgin and modified asphalt concrete mixtures using Mechanistic Empirical Pavement Design Guide (MEPDG) program. The fourth step was calculating cost/benefit ratio. It was found that using polymers increased pavement life for all different types of used polymers. HDPE gave the best improvement in percent increase in design life followed by novolac followed by PVC and then waste plastic bags. The minimum cost was obtained by waste plastic bags, followed by HDPE, followed by PVC and then novolac. The minimum cost per benefit ratio obtained by waste plastic bags followed by HDPE followed by PVC and then novolac.
Keywords
Asphalt mixtures; Cost analysis; MEPDG; polymers
Statistics
Article View: 133
PDF Download: 363