A Comparison Study between 3-D CFD and Experimental Data of Butterfly Valve Coefficients. | ||||
MEJ- Mansoura Engineering Journal | ||||
Article 12, Volume 39, Issue 3, September 2014, Page 10-22 PDF (1.08 MB) | ||||
Document Type: Research Studies | ||||
DOI: 10.21608/bfemu.2020.102725 | ||||
View on SCiNiTO | ||||
Authors | ||||
Mohammed M. Said 1; Hossam AbdelMeguid2; Lotfy Hassan Rabie Sakr3 | ||||
1GUPCO - Gulf of Suez Petroleum Co., 270 Palestine St. 4th Sector, New Maadi, Maadi, Cairo, Egypt | ||||
2Mechanical Power Engineering Department., Faculty of Engineering., El-Mansoura University., El-Mansoura 35516., Egypt. | ||||
3Mechanical Power Engineering Department., Faculty of Engineering., El-Mansoura University., Mansoura., Egypt. | ||||
Abstract | ||||
Computational fluid dynamics (CFD) enables scientists and engineers to perform ‘numerical experiments’ (i.e., computer simulations) in a ‘virtual flow laboratory’. Numerical simulation permits valve manufacture to determine valve sizing coefficients and to solve problems involving valves fluid flow. Valve designer via CFD could identify and eliminate valve flow problems before starting the manufacturing step. This technique is less costly alternative to determine the flow coefficients based on CFD calculations. Butterfly valves are versatile components widely used in hydraulic systems as shutoff and throttling valves. In this study, a comprehensive 3D simulation study for 2" (50 DN STC model) butterfly valve is conducted to establish a trusted and a calibrated numerical solution model after comparing with experimental data. The goal of this study is to verify and validate CFD code to obtain reasonable results for control valve coefficients calculation. The steady and incompressible Navier-Stokes equations are solved numerically to predict the flow behavior and compute the pressure loss, flow, and torque coefficients. | ||||
Keywords | ||||
CFD; Control valve; Butterfly valve; Valve coefficients | ||||
Statistics Article View: 234 PDF Download: 621 |
||||